Good Evening, I would like to replace the bushings on my model 61 blade. I need 2 of each of part numbers Y1780c, Y1781c and Y1782c. These are no longer available from Deere. Is there anyone who makes these or has available? Any help would be greatly appreciated.
Thanks! Gordon
Search found 10 matches
- Sat Apr 28, 2018 6:01 pm
- Forum: Early model JD crawler technical support
- Topic: Model 61 Blade bushings needed
- Replies: 2
- Views: 2912
- Mon Jan 29, 2018 4:14 pm
- Forum: Early model JD crawler technical support
- Topic: 420 Tranmission clutch question
- Replies: 1
- Views: 2521
420 Tranmission clutch question
Need to purchase a clutch kit for my 420 crawler serial #132990. According to the parts catalog the pressure plate number is AM227T for #131309-139999- then changes to AM2576T for #140000 and up. Problem is I can find all kinds of kits for AM2576 but cant for AM227. Does anyone know if the AM2576 10...
- Mon Jan 01, 2018 8:07 am
- Forum: Early model JD crawler technical support
- Topic: 1958 420c reverser project
- Replies: 9
- Views: 9297
Re: 1958 420c reverser project
It does look like there may be a problem in there as well though I have not yet pulled apart. I am now considering removing the reverser depending on the availability of the used parts I may also need.. The seals leak around the shifter rail and new seals will not stay in place when you engage from ...
- Sat Dec 30, 2017 12:17 pm
- Forum: Early model JD crawler technical support
- Topic: 1958 420c reverser project
- Replies: 9
- Views: 9297
Re: 1958 420c reverser project
Dtoots and Jim, thanks for the info. I am waiting on my manual to come. So there is not way to replace the rear discs without pulling that whole assembly......oh boy.....
- Wed Dec 27, 2017 2:47 pm
- Forum: Early model JD crawler technical support
- Topic: 1958 420c reverser project
- Replies: 9
- Views: 9297
1958 420c reverser project
Good Afternoon, My Crawler has a late model reverser that is on the left side and has clutch packs. We have split the crawler and pulled the forward packs and they looked pretty good but will replace while I am there. Then found a pile of clutch pieces in the bottom of the case and will need to repl...
- Wed Mar 22, 2017 4:35 pm
- Forum: Early model JD crawler technical support
- Topic: 420c Reverser quesitons
- Replies: 17
- Views: 13983
- Mon Mar 20, 2017 4:54 pm
- Forum: Early model JD crawler technical support
- Topic: 420c Reverser quesitons
- Replies: 17
- Views: 13983
- Mon Mar 20, 2017 4:44 pm
- Forum: Early model JD crawler technical support
- Topic: 420c Reverser quesitons
- Replies: 17
- Views: 13983
Thanks for the insights Lavoy! Pop Pop, This IS a wonderful site and I have already referenced several times. I live in Northern Finger Lakes region of New York State about 30 minutes from Canandaigua where the Expo is held. I love Debuque tractors and have a nice M. I had been searching for a nice ...
- Mon Mar 20, 2017 6:26 am
- Forum: Early model JD crawler technical support
- Topic: 420c Reverser quesitons
- Replies: 17
- Views: 13983
Thanks for your help Stan and Lavoy! The reverser shaft that goes in the housing, according to diagrams there looks to be two seals back to back outside of the housing that seals in oil and keeps dirt out. This is the source of my leak. Would I be able to get those seals out and replace without have...
- Sun Mar 19, 2017 6:55 am
- Forum: Early model JD crawler technical support
- Topic: 420c Reverser quesitons
- Replies: 17
- Views: 13983
420c Reverser quesitons
Good morning, I am new to the crawler world and made my first purchase a few weeks ago. I purchased 1958 420 from the original owner and found just 8 miles from my home! It sat in a barn for many years, but was started every spring to keep it freed up and was taken very good care of. It runs very we...