Search found 16 matches
- Sat Oct 29, 2022 1:59 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New replacement crankshaft pumps and driveline
- Replies: 2
- Views: 11584
Re: New replacement crankshaft pumps and driveline
Will this include a 350b? If so when do you anticipate having parts? Thanks!
- Sat Oct 31, 2020 10:07 am
- Forum: Late model JD crawler technical support
- Topic: Track Adjuster
- Replies: 4
- Views: 3085
Re: Track Adjuster
Sorry...It's a JD 350BE My son found the yoke and bought it on BrokenTractor.com. The seal kit that he bought is the only one they listed for the 350b. He didn't do enough research and we ended up with the wrong seal. The seal we received came from Bulldog and is a JH-BD-905000 Their part number for...
- Sat Oct 31, 2020 9:38 am
- Forum: Late model JD crawler technical support
- Topic: Track Adjuster
- Replies: 4
- Views: 3085
Track Adjuster
Well I broke the track adjuster Yoke (cylinder). It split in half. Not sure why, I would think the spring would give enough to keep from putting too much pressure from the piston on the grease, but I don't know....IDEAS? (Just so I won't do it again). Real problem is I bought a new yoke but I have t...
- Sun Sep 30, 2018 6:47 pm
- Forum: Late model JD crawler technical support
- Topic: 350B Hydraulic Pump Shaft
- Replies: 3
- Views: 3909
350B Hydraulic Pump Shaft
Twisted the gear shaft stub off today and need to replace the gear shaft in the pump or rebuild the pump or buy a reman pump. Anyone know where to find parts? Thanks
- Sun Sep 30, 2018 6:08 pm
- Forum: Late model JD crawler technical support
- Topic: 350b Hydraulic Pump Shaft
- Replies: 1
- Views: 2651
350b Hydraulic Pump Shaft
Well, the 350 stopped all hydraulic operation today. Upon investigation i found the stub shaft coming out of the pump twisted in two ( or more likely worn in two ). Does anyone know where I can find parts to rebuild the pump or at least a new input shaft? Thanks
- Sat May 05, 2018 11:44 am
- Forum: Late model JD crawler technical support
- Topic: JD 350b track off problems
- Replies: 7
- Views: 5334
Re: JD 350b track off problems
All of your help was great. I put the plug back hand tight then backed it off a couple rounds. Used the blade and a pipe to apply pressure to the idler bracket. Tapped every so gently 😉 with a large sledge on the ram and grease came out the weep hole. An hour of pushing and tapping and the idler was...
- Sat May 05, 2018 8:05 am
- Forum: Late model JD crawler technical support
- Topic: JD 350b track off problems
- Replies: 7
- Views: 5334
Re: JD 350b track off problems
Thanks for all the replies. I took a pipe between the six way blade and the idler and pushed. The idler will slide back about a 1/4 inch compressing the spring but no grease is coming out of the zert hole or plug. Can’t find the check ball??? Is it under The plug? Shouldn’t it come out with the grea...
- Sat May 05, 2018 6:25 am
- Forum: Late model JD crawler technical support
- Topic: JD 350b track off problems
- Replies: 7
- Views: 5334
Re: JD 350b track off problems
I pulled the plug and the grease zert both if that’s what you mean by releasing the pressure/tension on the front “idler” ( do you mean the front wheel?). Is it called an idler? I always called it the front wheel. 😁. I can’t get it to slide back. That has to happen for me to get the track back on, r...
- Fri May 04, 2018 8:43 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350b track off problems
- Replies: 7
- Views: 5334
JD 350b track off problems
Track came off to the inside. I have tried a come-along on the front wheel to slide the tensioner but it doesn’t move a bit. Any ideas on moving that front wheel back? Track is wedged under the crawler. The master pin is on the bottom...of course. Any advise is appreciated
- Sun Jun 25, 2017 11:05 am
- Forum: Late model JD crawler technical support
- Topic: 350 B Lower Radiator Hose
- Replies: 2
- Views: 3136
Re: 350 B Lower Radiator Hose
Thanks. Been on vacation back at it
Now. I'll give that a try!
Now. I'll give that a try!
- Sun Jun 18, 2017 4:24 pm
- Forum: Late model JD crawler technical support
- Topic: 350 B Lower Radiator Hose
- Replies: 2
- Views: 3136
350 B Lower Radiator Hose
This may seem quite simple but is there a trick to replacing the lower Radiator Hose on at 350 b? With the grill out I can "feel" the hose clamp on the Radiator, but no way can I get on it to loosen. Does the Radiator need to come out just to put the hose on? Thanks for any advise in advance.
- Mon May 08, 2017 12:46 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 Reverser Adjustment
- Replies: 4
- Views: 5160
JD 350 Reverser Adjustment
I have a 74 JD 350b dozer and I have read a lot about a screw that "adjusts the flow" to the reverser. Can anyone provide an exact location of this screw? a picture would be really great. New to the Dozer world, and loving it. Replaced both Steering Clutches already. I think I need a little twerk on...
- Fri Apr 07, 2017 5:13 am
- Forum: Late model JD crawler technical support
- Topic: 350B axel removal
- Replies: 2
- Views: 2830
350B axel removal
Is there any reason the axel will not come out of the differential side?[/list]
- Wed Mar 22, 2017 5:01 pm
- Forum: Late model JD crawler technical support
- Topic: Steering problems 350b
- Replies: 54
- Views: 39899
- Mon Mar 13, 2017 8:08 pm
- Forum: Late model JD crawler technical support
- Topic: Steering problems 350b
- Replies: 54
- Views: 39899