JDcrawlers Messageboard

Lavoy Thanks for the reply!

I'll check it out, also you might check out ebay auction 300032509202 2010c he's going to scrap it if no one buys it.

My 2010C hour meter is missing and I'm looking for a suitable replacement any suggestions?


Thanks!

Thanks for all the info, it has helped allot! I ran the compression test and have about 250-270lb across cranking. Then checked the pump timing and found it was at least 10deg BTDC, backed that off. Got it started on a couple cylinders, decided to pull and clean the injectors. Reinstalled the inject...

Thanks for the info! The muffler is laying on the tracks but he did put a piece of sheet metal over the hole in the hood and we turned it over by hand/starter before I bought it. I'm thinking it may be the valves too. Maybe not from rust but from gummed up valve stems. Where this crawler came from i...

Looks like this post has had allot of good advise for checking the circuit, but I thought I might help. That 12V coil is actually a 6 volt coil that is only 12V when starting, typically. A typical 12V point coil ignition circuit has a ignition resistor prior to the coil to drop the voltage to the co...

If all you have is a dozer to take the tree down, I found a method that worked well for me and is mentioned in part in another post is. When I was in the SeaBees 30 plus years ago they had a manual on pushing trees down with a dozer. They suggest that you first cut the roots around three sides leavi...

I just bought a 2010C loader that won't start. The story goes is he bought it running from an equipment dealer, loaded it on his trailer. He said that it seemed underpowered when it was loaded. When he arrived home went to start it and it wouldn't start. It turns over fine and diesel fumes come out ...