Search found 4 matches
- Mon Jul 24, 2017 9:20 am
- Forum: Early model JD crawler technical support
- Topic: 1010 slipping
- Replies: 14
- Views: 10740
Re: 1010 slipping
What is typically involved in an R&R and what might the cost be.Not sure I want to dive any deeper into this machine time wise and money wise for something that gets used less than 10 hours a year.
- Sat Jul 22, 2017 6:28 am
- Forum: Early model JD crawler technical support
- Topic: 1010 slipping
- Replies: 14
- Views: 10740
Re: 1010 slipping
Never in my life had I owned something that I used so little and worked on so much.Can I expect it to slowly get worse or progressively get worse? I use it less than 5 hours a year.
- Fri Jul 21, 2017 6:08 am
- Forum: Early model JD crawler technical support
- Topic: 1010 slipping
- Replies: 14
- Views: 10740
Re: 1010 slipping
It's possible it's the steering clutches but I just had both sides apart and went through them.Both sides are slipping evenly so that is another reason I leaned towards it not being the steering clutches.I just now came in from trying it while the machine was not warmed up and in reverse against a t...
- Thu Jul 20, 2017 3:34 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 slipping
- Replies: 14
- Views: 10740
1010 slipping
I have a 1010 and when I get up against it on a straight hard push such as a tree I have something slipping (tracks not turning).I have a reverser so aside from my steering clutches,where else could the slippage come from?