Search found 64 matches

by Keith-OR
Sun Nov 28, 2021 6:56 pm
Forum: Early model JD crawler technical support
Topic: New (to me) BO Lindeman
Replies: 28
Views: 17695

Re: New (to me) BO Lindeman

There are no new track pads available. Lavoy There are new pads available from the museum at Union Gap , WA, the press that made the original pads is still function able, every so often they press out new pads. Couple years ago I was at the tractor show there and they were running to press.. Quite i...
by Keith-OR
Fri May 07, 2021 10:45 pm
Forum: Early model JD crawler technical support
Topic: John Deere 1010 Dozer
Replies: 8
Views: 5176

Re: John Deere 1010 Dozer

Glad ya made it on here Tim, Like I said all the knowledge about these crawlers is on here!!!
by Keith-OR
Wed May 05, 2021 10:17 am
Forum: Early model JD crawler technical support
Topic: Hey Lavoy
Replies: 3
Views: 3099

Re: Hey Lavoy

My mistake on handle, he is using Timr

Thanks
by Keith-OR
Tue May 04, 2021 10:54 pm
Forum: Early model JD crawler technical support
Topic: Hey Lavoy
Replies: 3
Views: 3099

Hey Lavoy

There is an individual trying to get register on this forum that needs some info, and will probably need the gage to set fingers on the 1010 pressure plate. I think he is probably using handle drott t340.

Thanks
by Keith-OR
Sat Jan 30, 2021 2:34 pm
Forum: Early model JD crawler technical support
Topic: up date 1010 injector pump
Replies: 7
Views: 5480

Re: up date 1010 injector pump

Why reface when there is no wear on either valve face or seat. I have a BIL that worked in a head rebuild shop for 20 years, and he looked at my valves and told me just to lap them in. So I followed advice of the individual in the know!!! About the same advice I relieved from machinist that surfaced...
by Keith-OR
Fri Jan 29, 2021 2:10 pm
Forum: Early model JD crawler technical support
Topic: up date 1010 injector pump
Replies: 7
Views: 5480

Re: up date 1010 injector pump

They had to remove .0065 to clean my head up. I checked with straight edge on the head to make sure the valves had enough clearance , everyone checked out good. I'm lapping the valves in with fine compound, after which I will use Prussian Blue to make sure there is not high or low spots on valves or...
by Keith-OR
Wed Jan 27, 2021 10:38 pm
Forum: Early model JD crawler technical support
Topic: up date 1010 injector pump
Replies: 7
Views: 5480

Re: up date 1010 injector pump

Got the head surfaced today, only took this machine shop 45 minutes to surface it. And cost me $ 95.00 which I thought was a really fair price. A supper nice job!!! :!: :!: :!:
by Keith-OR
Mon Jan 25, 2021 6:51 pm
Forum: Early model JD crawler technical support
Topic: up date 1010 injector pump
Replies: 7
Views: 5480

up date 1010 injector pump

I was going to pull injector pump off my 1010 diesel, so I pulled #1 glow plug to get engine up on # 1 compression before I pulled pump.. But I was getting two compression strokes on # 1. I decided I better run a compression test on all cylinders, I had to make an adapter for the glow plug for my co...
by Keith-OR
Wed Jan 13, 2021 6:45 pm
Forum: Early model JD crawler technical support
Topic: 1010 injector pump.
Replies: 0
Views: 4594

1010 injector pump.

My injector pump failed, kept trying to bleed it, was getting NO pressure at the injectors. I talked to an injector pump man this morning, first thing he asked me "how long has it been sitting" I told him about 2 or 3 years. Informed me parts were frozen or gummed up and probably needed rebuilt. So ...
by Keith-OR
Sun Jan 10, 2021 3:00 pm
Forum: Early model JD crawler technical support
Topic: 850 watt tank heater
Replies: 1
Views: 2382

850 watt tank heater

I'm sure not impressed with this 850 W tank heater, I've had it plugged in all night and block is not that warm and it never got below 38 degrees here. I guess it would be alright if ya just wanted to keep the engine from freezing. I keep anti freeze in all my rigs, anti freeze is cheap compared to ...
by Keith-OR
Sun Jan 03, 2021 7:39 pm
Forum: Early model JD crawler technical support
Topic: install tank heater
Replies: 3
Views: 3227

Re: install tank heater

This picture is larger and easier to view. Maybe I'll figure out how to post pictures on this forum, and what size are the best.
I used the heater hose off a 1995 Chev diesel.

Image
by Keith-OR
Sat Jan 02, 2021 11:16 pm
Forum: Early model JD crawler technical support
Topic: install tank heater
Replies: 3
Views: 3227

Re: install tank heater

I'll have to post picture again as it did not come out large to really see my fitings

Image
by Keith-OR
Sat Jan 02, 2021 11:03 pm
Forum: Early model JD crawler technical support
Topic: install tank heater
Replies: 3
Views: 3227

install tank heater

here is the finished installation of the tank heater on my 1010 diesel. I had to use copper pipe as there was not enough room for steel pipe between the thermostat housing and intake manifold.

Image
by Keith-OR
Wed Nov 11, 2020 10:19 am
Forum: Early model JD crawler technical support
Topic: 1010 diesel Blade??
Replies: 3
Views: 2645

Re: 1010 diesel Blade??

So with some modification will it work. I'm good at modifications, I have most of the tools and equipment. Is it the 350 same width in between the tracks.

thanks
by Keith-OR
Tue Nov 10, 2020 11:12 pm
Forum: Early model JD crawler technical support
Topic: 1010 diesel Blade??
Replies: 3
Views: 2645

1010 diesel Blade??

Will a blade and c-frame off a JD 350 fit my 1010 loader crawler if I remove the loader and all the brackets??

Thanks