Search found 25 matches

by Claus
Wed Oct 23, 2019 3:32 pm
Forum: Show & Tell
Topic: Newbie with 420C
Replies: 10
Views: 600

Re: Newbie with 420C

Yeah, I'm not a Facebook guy in anyway then photobucket threw a hand grenade in the whole thing. I remember you doing something with some Tonka toys. Good luck with the new dozer.
by Claus
Tue Oct 22, 2019 5:56 pm
Forum: Show & Tell
Topic: Newbie with 420C
Replies: 10
Views: 600

Re: Newbie with 420C

PH Paul, I remember you from Pirate Farm Toys. Nice to see you here.
by Claus
Sun Oct 20, 2019 3:53 pm
Forum: Late model JD crawler technical support
Topic: 450C Dozer 1974 Alternator Troubleshooting
Replies: 9
Views: 381

Re: 450C Dozer 1974 Alternator Troubleshooting

Delco $70 VS Motorolla $235. I went with a Delco.
by Claus
Sun Oct 20, 2019 3:41 pm
Forum: Late model JD crawler technical support
Topic: 450C Coming Home.
Replies: 2
Views: 232

450C Coming Home.

I'm pretty stoked my 450C is coming home tomorrow. I bought it 2 years ago and it broke very shortly after. The castle nut on the end of the pinion shaft had broken and a bearing was out in the front gearbox, hard to say which happened first but it was a mess. My Uncle donated His time and shop, can...
by Claus
Mon Apr 08, 2019 8:41 pm
Forum: Late model JD crawler technical support
Topic: Seat cushions for 450B
Replies: 3
Views: 1456

Re: Seat cushions for 450B

Last fall I bought a set of K+M cushions for my 450C track loader. Back, seat and both arm rest cost $500. They are metal backed and made in Minnesota.

https://www.tractorseats.com/default.aspx
by Claus
Sun Apr 07, 2019 8:47 pm
Forum: Late model JD crawler technical support
Topic: JD450C Transmission case leak/repair.
Replies: 4
Views: 1273

Re: JD450C Transmission case leak/repair.

I know this is kind of off topic but on the same lines at the same time. A year and a half ago I bought a 450C track loader for cleaning my fence rows up, after using it literally two days a bearing went out in the transmission and two gears got on top of each other and bad things happened. I stoppe...
by Claus
Wed Oct 31, 2018 8:14 pm
Forum: Late model JD crawler technical support
Topic: 450C Seat Cushions
Replies: 8
Views: 1474

Re: 450C Seat Cushions

Bit the bullet and ordered the K&M set. Back when I had an Allis Chalmers D17 I had bought a complete seat from K&M, looking back it was so nice, I'm sure it's the right way to go.
by Claus
Tue Oct 30, 2018 11:03 am
Forum: Late model JD crawler technical support
Topic: 450C Seat Cushions
Replies: 8
Views: 1474

Re: 450C Seat Cushions

K&M list cushions that look nice and factory replacements. $420.00 for the back, bottom and both arm rests, seems high, made in the USA though. https://www.tractorseats.com/images/product/large/594.jpg https://www.tractorseats.com/images/product/large/593.jpg https://www.tractorseats.com/images/PROD...
by Claus
Tue Oct 30, 2018 10:38 am
Forum: Late model JD crawler technical support
Topic: 450C Seat Cushions
Replies: 8
Views: 1474

Re: 450C Seat Cushions

I actually like the pleats and think the plain seat looks cheap but I want what fits right. I found this pic on the net, at first I thought it was an original seat for a 450C but when you look closer you can see this seat has suspension and the arm rest are sitting higher than the original ones do o...
by Claus
Mon Oct 29, 2018 11:19 pm
Forum: Late model JD crawler technical support
Topic: 450C Seat Cushions
Replies: 8
Views: 1474

450C Seat Cushions

This set of cushions is listed for a 350C, 350D. Will it fit a 450C? I need to find out the bolt pattern dimensions but thought somebody might know something. Thanks. Did a 450C seat originally have pleats like that?

Image
by Claus
Tue Jul 10, 2018 4:15 am
Forum: Late model JD crawler technical support
Topic: Regular Hy-Gard or Low Viscosity Hy-Gard
Replies: 8
Views: 1437

Re: Regular Hy-Gard or Low Viscosity Hy-Gard

Crap! :shock: My Uncle is rebuilding my 450C transmission. I didn't even realize there was more than one JD HY Gard and bought 9 Buckets, 45 Gallons of the Low Viscosity. Maybe I can exchange but I bought it off eBay because a Local Deere parts guy gave me a bogus brice of $1440 for 40 Gallons.
by Claus
Wed Apr 25, 2018 7:03 am
Forum: Late model JD crawler technical support
Topic: 450C Ring and Pinion
Replies: 4
Views: 977

Re: 450C Ring and Pinion

Part number needed is AT30888.
by Claus
Tue Apr 24, 2018 7:57 pm
Forum: Late model JD crawler technical support
Topic: 450C Ring and Pinion
Replies: 4
Views: 977

450C Ring and Pinion

Hello, Replacing the ring and pinion in my 450C track loader. Bought one from Reliable After Market Parts in Michigan off eBay. Opened the box and the pinion shaft is much shorter than mine. I didn't even remove the ring gear from the box as this is obviously the wrong parts. Where do I get the corr...
by Claus
Thu Nov 09, 2017 12:01 pm
Forum: Late model JD crawler technical support
Topic: 450C Track Loader, Stupid Question
Replies: 1
Views: 839

450C Track Loader, Stupid Question

My machine is not at home right now, I was looking to replace all the knobs on top of the levers. What thread are the knobs? Thanks.