Search found 6 matches

by jeremyhayes
Sun Oct 15, 2017 10:35 pm
Forum: Early model JD crawler technical support
Topic: 420c steering clutch issue
Replies: 11
Views: 9468

Re: 420c steering clutch issue

Just too follow up, the brake bands were way out which seemed to be the biggest contributor to the problem but ran it all afternoon and it did great thanks again for the help
by jeremyhayes
Tue Oct 03, 2017 9:43 pm
Forum: Early model JD crawler technical support
Topic: 420c steering clutch issue
Replies: 11
Views: 9468

Re: 420c steering clutch issue

Perfect I'll start there and hope I can get it right :mrgreen: thanks to all for the advice and guidance
by jeremyhayes
Tue Oct 03, 2017 7:49 pm
Forum: Early model JD crawler technical support
Topic: 420c steering clutch issue
Replies: 11
Views: 9468

Re: 420c steering clutch issue

It doesn't look to hard, but it's the unknowns that make me nervous. I'm a big rig mechanic so the tools aren't the issue it's just not knowing the hidden problems that concern me
by jeremyhayes
Tue Oct 03, 2017 3:59 pm
Forum: Early model JD crawler technical support
Topic: 420c steering clutch issue
Replies: 11
Views: 9468

Re: 420c steering clutch issue

Thank you, I was dreading having to pull it apart
by jeremyhayes
Tue Oct 03, 2017 1:15 pm
Forum: Early model JD crawler technical support
Topic: 420c steering clutch issue
Replies: 11
Views: 9468

Re: 420c steering clutch issue

Do I need to get into the housing for any of the needed adjustments? I tried adjust the adjustment bolt right under the cover and also moved the throw out bearing adjustment to see if it changed but didn't seem to help much
by jeremyhayes
Tue Oct 03, 2017 10:23 am
Forum: Early model JD crawler technical support
Topic: 420c steering clutch issue
Replies: 11
Views: 9468

420c steering clutch issue

My grandpa has a 420c crawler that just had both steering clutches rebuilt a few years ago but now any time you pull the left steer lever it pops twice looking through the inspection cover over the left steer clutch you can see the release bearing pop a little crooked each time it pops, looks like i...