DrLoch - A photo of the brackets on yours would be great. I am picturing the JD brackets being a lot thicker.
I will check the frame rails for welds/cracks. If I find that both or one frame rail is cracked, are they repairable?
Search found 39 matches
- Wed Jan 28, 2015 8:41 pm
- Forum: Late model JD crawler technical support
- Topic: Looking at 450C Loader
- Replies: 11
- Views: 9443
- Sat Jan 24, 2015 7:56 pm
- Forum: Late model JD crawler technical support
- Topic: Looking at 450C Loader
- Replies: 11
- Views: 9443
- Sat Jan 24, 2015 7:46 pm
- Forum: Late model JD crawler technical support
- Topic: Looking at 450C Loader
- Replies: 11
- Views: 9443
- Sat Jan 24, 2015 6:58 pm
- Forum: Late model JD crawler technical support
- Topic: Looking at 450C Loader
- Replies: 11
- Views: 9443
Looking at 450C Loader
Hi all. I hope someone can help me out here on two unknown steel plates I noticed on a 450C loader that I was looking at today. The plate is on both sides of the machine below the battery box and below the hyd control valve compartment. Appears to bolt to loader frame and rear housing. Anyone know w...
- Tue Dec 20, 2011 1:26 pm
- Forum: Late model JD crawler technical support
- Topic: 450 - Removing Clutch Housing
- Replies: 5
- Views: 5507
- Mon Dec 19, 2011 9:40 pm
- Forum: Late model JD crawler technical support
- Topic: 450 - Removing Clutch Housing
- Replies: 5
- Views: 5507
- Sun Dec 18, 2011 8:28 pm
- Forum: Late model JD crawler technical support
- Topic: 450 - Removing Clutch Housing
- Replies: 5
- Views: 5507
450 - Removing Clutch Housing
I am in the process of getting in my hlr trans to redo clutch packs. I have the motor out and almost ready to remove clutch housing but I do not know the best way to remove the hydraulics on the right side (brake side) that goes through the housing. It is real tight between the housing and frame rail.
- Thu Sep 29, 2011 11:33 am
- Forum: Late model JD crawler technical support
- Topic: H-L-R Trans 450
- Replies: 0
- Views: 2731
H-L-R Trans 450
Is the pinion gear for each clutch pack notched for key to lock to the shaft?
- Sun Sep 25, 2011 11:23 am
- Forum: Late model JD crawler technical support
- Topic: Parting Out a 1966 JD 450 Crawler
- Replies: 2
- Views: 3551
- Fri Sep 23, 2011 7:18 am
- Forum: Late model JD crawler technical support
- Topic: Parting Out a 1966 JD 450 Crawler
- Replies: 2
- Views: 3551
Parting Out a 1966 JD 450 Crawler
I am parting out a good running JD 450 crawler with outside blade. Transmission and steering clutches are bad. Transmission (HLR) will not go into reverse, pressure is good. Steering clutches are not working. Sheet metal and badges are all there. Housing are all good, no broken bolts or cracks. Anyo...
- Tue Dec 29, 2009 5:41 am
- Forum: Late model JD crawler technical support
- Topic: Rebuild HLR Clutch Packs
- Replies: 0
- Views: 2068
Rebuild HLR Clutch Packs
Anyone know what parts will cost to rebuild all the clutch packs in the HLR transmission on a '66 JD 450?
- Sun Sep 27, 2009 8:29 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: FOR SALE...1966 JD 450
- Replies: 0
- Views: 2689
FOR SALE...1966 JD 450
1966 JD 450 with outside blade. Needs steering clutches on both sides. Will NOT go in reverse. Motor starts and runs. I have the blade, fuel tank/hyd. tank/battery console off machine right now. I don't have time right now to fix. Reasonable offers. For pics go to: http://www.jdcrawlers.com/messageb...
- Thu Jan 08, 2009 7:48 pm
- Forum: Late model JD crawler technical support
- Topic: 450 tutourial
- Replies: 13
- Views: 13004
Re: 450 tutourial
[/quote] #1 is the HL-R powershift transmission. Very rugged and also, very expensive to work on. Often, worn HL-Rs work fine when cold, and as they heat up, come to a dead stop. With some machines, it may take an hour or running before the problem shows. Many - when they get like this - go to aucti...
- Sun Apr 20, 2008 7:42 am
- Forum: Late model JD crawler technical support
- Topic: 450 Dozer blade removal
- Replies: 10
- Views: 8694
- Wed Mar 12, 2008 5:37 am
- Forum: Late model JD crawler technical support
- Topic: Need HLR Clutch Packs
- Replies: 5
- Views: 5979