JDcrawlers Messageboard

Just got back to working on the crawler. I found my leak on the track adjuster. It was seeping from the grease fitting threads.
Thanks for all the help.

I need to replace my ring & pinon gear set PN AT18842 in my 350 straight Crawler loader with a reverser and a transmission that has a revers gear. I have a spare transmission without a revers gear that has a broken case at the upper LH mounting bolt & worn input shaft in the area of the coupler. The...

Thanks for the help I cleaned the area and found no cracks. I will check to see if the ball is damaged or missing and the fitting condition. and report my findings. It looks like some seepage from the seal so I will tear it down and put a seal kit in it. since I will have to split the track to do so...

Thanks for the help I cleaned the area and found no cracks. I will check to see if the ball is damaged or missing and the fitting condition. and report my findings. It looks like some seepage from the seal so I will tear it down and put a seal kit in it. since I will have to split the track to do so...

Thanks. I will clean it better and check for cracks, The grease comes out slowly in a curlicue shape about 3/16 in diameter between the 2 fittings. It is only noticeable after a few hours of use.
The cylinder & rod area dose not leak.

I have a straight 350 that has one old style adjuster. Is it possible to rebuild. It loses grease from around the grease fitting & relief area.