Just got back to working on the crawler. I found my leak on the track adjuster. It was seeping from the grease fitting threads.
Thanks for all the help.
Search found 6 matches
- Sat Jun 13, 2020 8:17 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 Track adjuster rebuild
- Replies: 8
- Views: 8072
- Mon Nov 04, 2019 7:35 pm
- Forum: Late model JD crawler technical support
- Topic: ring & pinon gear replacment 350 straight
- Replies: 0
- Views: 3522
ring & pinon gear replacment 350 straight
I need to replace my ring & pinon gear set PN AT18842 in my 350 straight Crawler loader with a reverser and a transmission that has a revers gear. I have a spare transmission without a revers gear that has a broken case at the upper LH mounting bolt & worn input shaft in the area of the coupler. The...
- Mon Oct 28, 2019 9:03 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 Track adjuster rebuild
- Replies: 8
- Views: 8072
Re: JD350 Track adjuster rebuild
Thanks for the help I cleaned the area and found no cracks. I will check to see if the ball is damaged or missing and the fitting condition. and report my findings. It looks like some seepage from the seal so I will tear it down and put a seal kit in it. since I will have to split the track to do so...
- Mon Oct 28, 2019 9:03 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 Track adjuster rebuild
- Replies: 8
- Views: 8072
Re: JD350 Track adjuster rebuild
Thanks for the help I cleaned the area and found no cracks. I will check to see if the ball is damaged or missing and the fitting condition. and report my findings. It looks like some seepage from the seal so I will tear it down and put a seal kit in it. since I will have to split the track to do so...
- Tue Jan 15, 2019 9:07 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 Track adjuster rebuild
- Replies: 8
- Views: 8072
Re: JD350 Track adjuster rebuild
Thanks. I will clean it better and check for cracks, The grease comes out slowly in a curlicue shape about 3/16 in diameter between the 2 fittings. It is only noticeable after a few hours of use.
The cylinder & rod area dose not leak.
The cylinder & rod area dose not leak.
- Thu Jan 10, 2019 11:24 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 Track adjuster rebuild
- Replies: 8
- Views: 8072
JD350 Track adjuster rebuild
I have a straight 350 that has one old style adjuster. Is it possible to rebuild. It loses grease from around the grease fitting & relief area.