Search found 2109 matches
- Fri Jan 08, 2021 12:43 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Right Brake not working
- Replies: 9
- Views: 7282
Re: 450C Right Brake not working
Welcome to the board. First question to me always for a "450C" is: What is the complete serial number to confirm it is truly a C series? There were 450 Cs and then there were 450Cs. Been down the road of trying to diagnose things only to find out it was the wrong C. 450 Cs and most 450Bs had dry clu...
- Thu Jan 07, 2021 5:25 pm
- Forum: Late model JD crawler technical support
- Topic: Seeking advice on replacing high pressure hydraulic line in a 450B
- Replies: 13
- Views: 9360
Re: Seeking advice on replacing high pressure hydraulic line in a 450B
If your blade is hydraulic lift with manual tilt and angle, it is a 6410 blade. The 6410 blade hydraulic lines, valves, and other components related to the blade are in parts catalog PC920. They did not start including the blades in the crawler catalog until the 450C model. If you don't have a copy ...
- Thu Jan 07, 2021 3:38 pm
- Forum: Late model JD crawler technical support
- Topic: Straight 350 steering clutch
- Replies: 1
- Views: 2259
Re: Straight 350 steering clutch
Your answer is in this post.
viewtopic.php?f=8&t=13532&p=76768&hilit ... ips#p76768
viewtopic.php?f=8&t=13532&p=76768&hilit ... ips#p76768
- Thu Jan 07, 2021 3:33 pm
- Forum: Late model JD crawler technical support
- Topic: Seeking advice on replacing high pressure hydraulic line in a 450B
- Replies: 13
- Views: 9360
Re: Seeking advice on replacing high pressure hydraulic line in a 450B
Welcome to the Board. Did you purchase a pdf copy of John Deere TM1033 or something else? It has the typical hydraulic system info. The copy of that technical manual I have shows circuits and has a good bit of info on the system and components for loaders and dozers. If you are looking for the manua...
- Thu Jan 07, 2021 6:28 am
- Forum: Early model JD crawler technical support
- Topic: 2-53 swap into a gas 440 worth it?
- Replies: 10
- Views: 8344
Re: 2-53 swap into a gas 440 worth it?
If all the parts for the 440ICD are there why not rebuild it? Is the reverser still with it? That goes between the engine and transmission. You would still have your 440IC running to use while you do that. As noted the ICD used a heavier drive train, so to do it right, and expect it to last, you wou...
- Thu Jan 07, 2021 6:21 am
- Forum: Late model JD crawler technical support
- Topic: little help please
- Replies: 2
- Views: 2732
Re: little help please
Welcome to the Board. Yes, the Web Links Board was the wrong place to post this. It will likely be moved to the Late Models Board when a moderator sees it. I don't know of a separate manual for the 3325 winch. The winch info, for the model winch the factory used on a machine, is usually included in ...
- Wed Jan 06, 2021 6:20 am
- Forum: Early model JD crawler technical support
- Topic: my crawler wont move
- Replies: 4
- Views: 3940
Re: my crawler wont move
You say you have the engine free. Does that mean you have it so it turns over or does it mean it is running and are trying to turn the rest of the drive line under power. Just looking to clarify what you call free. I agree with Stan it sounds like you might just as well get going on pulling it apart...
- Wed Jan 06, 2021 5:45 am
- Forum: Late model JD crawler technical support
- Topic: Jd 350 boom cylinder disassembly
- Replies: 3
- Views: 3294
Re: Jd 350 boom cylinder disassembly
I can't see your cylinder but it sounds like you have the type where the gland nut holds the gland (I think you may find this part called the rod guide in some manuals) out against that snap ring to remove any play and to keep the gland from moving into the barrel during operation. That internal sna...
- Tue Jan 05, 2021 8:05 am
- Forum: Late model JD crawler technical support
- Topic: jd450 crawler
- Replies: 5
- Views: 4224
Re: jd450 crawler
boccop,
Just curious. What is the complete serial number of your 450? I'm just wondering if it is a straight 450 or a different series.
Jim
Just curious. What is the complete serial number of your 450? I'm just wondering if it is a straight 450 or a different series.
Jim
- Tue Jan 05, 2021 7:01 am
- Forum: Late model JD crawler technical support
- Topic: jd450 crawler
- Replies: 5
- Views: 4224
Re: jd450 crawler
I would say it would be best to reseal them, the system is designed for them to be there. You might be able to cobble something together to bypass them but it could lead to other issues and it would likely steer harder.
Jim
Jim
- Fri Jan 01, 2021 9:13 am
- Forum: Off-topic discussions
- Topic: Happy New Year!!!!
- Replies: 1
- Views: 12823
Re: Happy New Year!!!!
Happy New Year to all!
Best wishes,
Jim
Best wishes,
Jim
- Wed Dec 30, 2020 6:55 pm
- Forum: Late model JD crawler technical support
- Topic: Help identify this 550 dozer
- Replies: 3
- Views: 3403
Re: Help identify this 550 dozer
Welcome. The serial number/product identification number should be on the front panel of the battery box, right where you would see it as you get on the left side of the machine. The machine serial number is key, not the engine serial number (and there is no cross reference between those numbers). T...
- Fri Dec 25, 2020 8:36 am
- Forum: Off-topic discussions
- Topic: White Christmas!!!
- Replies: 6
- Views: 16942
Re: White Christmas!!!
Merry Christmas to all. It was looking good here, we had white on the ground yesterday. Today its 55, rain, heavy at times, along with strong gusting winds today. The 6 to 8" of snow, other than a few piles and packed spots, is gone already. Some mild to moderate areas of rivers flooding is expected...
- Mon Dec 21, 2020 3:30 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: John Deere 1010 Series Dozer
- Replies: 3
- Views: 3502
Re: John Deere 1010 Series Dozer
Hi gus,
He had posted about this on Yesterday's Tractors Crawler Forum, along with a Terratrac GT-25. When asked over there he posted his location as " Near Zanesville in southeastern Ohio". There is a picture of each one in one of his posts in the thread over there.
He had posted about this on Yesterday's Tractors Crawler Forum, along with a Terratrac GT-25. When asked over there he posted his location as " Near Zanesville in southeastern Ohio". There is a picture of each one in one of his posts in the thread over there.
- Fri Dec 11, 2020 6:21 pm
- Forum: Early model JD crawler technical support
- Topic: 440 icd water pump
- Replies: 4
- Views: 3784
Re: 440 icd water pump
It has been years since I have worked on a Jimmy, but I think the 53 series pumps were the same, other than you need to know if it is a left or right hand pump. But don't buy one based on my memory. Send Lavoy an email or give him a call, he might be able to supply a pump. You say local dealer? Is t...