Search found 2099 matches
- Sun May 19, 2024 7:14 am
- Forum: Late model JD crawler technical support
- Topic: Keep track pin in place
- Replies: 2
- Views: 24
Re: Keep track pin in place
If you buffed the pin and link enough that it went in with a few taps from a hammer, I would be welding it.
- Sun May 12, 2024 12:07 pm
- Forum: Early model JD crawler technical support
- Topic: 2010C S/N 39994 fuel filter conversion
- Replies: 2
- Views: 96
Re: 2010C S/N 39994 fuel filter conversion
If your tank is clean and buy clean fuel you don't need to change fuel filters that often. If your tank is dirty and you end up contaminating your fuel you buy, you need to fix those things first, the problem will still be there with a spin-on filter if you don't. Someone may have a parts list from ...
- Fri May 10, 2024 6:32 pm
- Forum: Late model JD crawler technical support
- Topic: diesel fuel leaking into engine oil, JD450b
- Replies: 3
- Views: 159
Re: diesel fuel leaking into engine oil, JD450b
Have you removed the fuel lines from the mechanical transfer pump? If the lines are off it, it can't put fuel in the base. If the active fuel lines are still on it, the pump would be my first place to suspect a leak into the base. If the lines are off the transfer pump,the umbrella seals on the inje...
- Wed May 08, 2024 7:24 am
- Forum: Late model JD crawler technical support
- Topic: Blade skid pad shoes?
- Replies: 4
- Views: 207
Re: Blade skid pad shoes?
Sorry but the shoes are not a "set it and forget it" control. Even with the shoes on the blade you are going to have to work the blade control. About the only place I have seen the shoes do much is on frozen ground. On frozen ground the blade will generally skim along, and the shoes only help preven...
- Tue May 07, 2024 6:58 pm
- Forum: Late model JD crawler technical support
- Topic: Blade skid pad shoes?
- Replies: 4
- Views: 207
Re: Blade skid pad shoes?
Oops, got my reply to this tagged on to your other thread. Edit: Here is a copy of it. You can use the online parts catalogs at https://partscatalog.deere.com/jdrc/ Enter 350B to get the parts catalog for your crawler. Your blade may be a 6305 (inside the tracks mounting or a 6310 for a blade mounte...
- Tue May 07, 2024 6:56 pm
- Forum: Late model JD crawler technical support
- Topic: Service & parts manuals
- Replies: 3
- Views: 166
Re: Service & parts manuals
You can use the online parts catalogs at https://partscatalog.deere.com/jdrc/ Enter 350B to get the parts catalog for your crawler. Your blade may be a 6305 (inside the tracks mounting or a 6310 for a blade mounted outside the tracks. Use the blade model number to get that parts catalog. You will fi...
- Sun May 05, 2024 3:06 pm
- Forum: Late model JD crawler technical support
- Topic: Service & parts manuals
- Replies: 3
- Views: 166
Re: Service & parts manuals
Welcome to the Boards. The first thread on the John Deere crawler FAQ's Board here has a listing of 350 model serial to year break down for the different series of 350s. You will see your 350B serial number falls in the 1972 build year. The E means it left the factory as a diesel with an inside moun...
- Thu May 02, 2024 10:48 am
- Forum: Early model JD crawler technical support
- Topic: Most desired older gas machine
- Replies: 2
- Views: 324
Re: Most desired older gas machine
420, 430 or 440 would be likely choices. I had a 430 with the 62 blade, wet clutch reverser and a Gearmatic 8A winch. It was handy to get around in the woods with.
The trick can be finding one with a good undercarriage.
The trick can be finding one with a good undercarriage.
- Wed May 01, 2024 10:14 am
- Forum: Late model JD crawler technical support
- Topic: Mounting a 9300 backhoe
- Replies: 2
- Views: 312
Re: Mounting a 9300 backhoe
Welcome to the boards. I don't have a good answer for you. The 550G parts Catalog does not include a backhoe as shown for earlier models. The G series is somewhat different than earlier crawlers. A John Deere brochure on a 550G shows the hoe as optional equipment, but no model number for the hoe. I ...
- Tue Apr 30, 2024 4:49 am
- Forum: Late model JD crawler technical support
- Topic: 450 C 1975 losing drive power when climbing
- Replies: 2
- Views: 251
Re: 450 C 1975 losing drive power when climbing
271126 is a 1977 serial number, by the list on the FAQ Board here. You could have clutch troubles mechanical at the engine or hydraulic in the HLR. You need a copy of the John Deere technical manual, publication # TM1102, for your 450C. There are adjustments and pressures to check. The manual will h...
- Mon Apr 29, 2024 3:22 pm
- Forum: Early model JD crawler technical support
- Topic: Seal PN for nut to reservoir - 420C
- Replies: 1
- Views: 339
Re: Seal PN for nut to reservoir - 420C
Give Lavoy a call, he likely has them. 701-361-1006 during CST business hours.
- Mon Apr 29, 2024 9:40 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 533776
Re: jd420 pics
Great news, something going right for you.
- Fri Apr 26, 2024 6:26 pm
- Forum: Early model JD crawler technical support
- Topic: She's running but clutch doesn't do anything
- Replies: 3
- Views: 4900
Re: She's running but clutch doesn't do anything
Have you pulled the pressure plate off the flywheel to see if the clutch disc is rusted to the flywheel or pressure plate? Are all the clutch fingers in place and about the same height? Another possibility is some of the clutch material has broke off the disc and piled up between the flywheel and pr...
- Fri Apr 26, 2024 10:22 am
- Forum: Late model JD crawler technical support
- Topic: 1976 JD 550 dozer
- Replies: 8
- Views: 5717
Re: 1976 JD 550 dozer
Try what I told you about pushing on something to check when/if the steering clutch disengages, then go from there.
- Fri Apr 26, 2024 10:21 am
- Forum: Late model JD crawler technical support
- Topic: looking for mark in vt that sells used parts
- Replies: 1
- Views: 2271
Re: looking for mark in vt that sells used parts
I haven't seen his ads on Craigslist for at least a couple years now.