Search found 6 matches
- Sun Dec 17, 2017 5:31 pm
- Forum: Early model JD crawler technical support
- Topic: 440 icd wiring diagram.
- Replies: 1
- Views: 3235
440 icd wiring diagram.
Does anyone have a 440 icd wiring diagram? I am starting to change out the old wiring on mine and it looks like some is wrong. Thanks
- Mon Nov 27, 2017 7:18 pm
- Forum: Early model JD crawler technical support
- Topic: JD 440 ICD oil filter
- Replies: 5
- Views: 5773
Re: JD 440 ICD oil filter
Thanks, I looked at the video and found some pictures. The filter is definitely gone. Does anyone have a close up photo of where the oil lines connect into the block? I'm going to put a spin on filter on it if I can find a kit.
- Fri Nov 24, 2017 5:27 pm
- Forum: Early model JD crawler technical support
- Topic: JD 440 ICD oil filter
- Replies: 5
- Views: 5773
JD 440 ICD oil filter
I can not find the oil filter on this machine. Other posts say it is on the left of motor under tank and behind governor. Is it possible it was removed? I don't see any lines blocked off / missing. Anyone have a picture?
- Sat Nov 18, 2017 12:14 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ICD trans oil drain and egine oil.
- Replies: 6
- Views: 5582
Re: 440 ICD trans oil drain and egine oil.
I agree. I have the final drives and transmission drained. Just waiting for oil and fuel filters. Does the reverser have oil in it? I understood it was just used if you had a pto or winch on the back. Mine does have the little horizontal lever by the shifter.
- Sat Nov 18, 2017 10:31 am
- Forum: Early model JD crawler technical support
- Topic: 440 ICD trans oil drain and egine oil.
- Replies: 6
- Views: 5582
Re: 440 ICD trans oil drain and egine oil.
Thanks, I did find it on the left side .
- Fri Nov 17, 2017 2:50 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ICD trans oil drain and egine oil.
- Replies: 6
- Views: 5582
440 ICD trans oil drain and egine oil.
Hello, I just purchased a 440 ICD. I am changing the transmission oil on it. Is the only drain the square head one on the bottom of the case?
Also, what should I run for engine oil? Is straight 30 ok?
Also, what should I run for engine oil? Is straight 30 ok?