Search found 6 matches

by mitchb
Sun Dec 17, 2017 5:31 pm
Forum: Early model JD crawler technical support
Topic: 440 icd wiring diagram.
Replies: 1
Views: 3008

440 icd wiring diagram.

Does anyone have a 440 icd wiring diagram? I am starting to change out the old wiring on mine and it looks like some is wrong. Thanks
by mitchb
Mon Nov 27, 2017 7:18 pm
Forum: Early model JD crawler technical support
Topic: JD 440 ICD oil filter
Replies: 5
Views: 5546

Re: JD 440 ICD oil filter

Thanks, I looked at the video and found some pictures. The filter is definitely gone. Does anyone have a close up photo of where the oil lines connect into the block? I'm going to put a spin on filter on it if I can find a kit.
by mitchb
Fri Nov 24, 2017 5:27 pm
Forum: Early model JD crawler technical support
Topic: JD 440 ICD oil filter
Replies: 5
Views: 5546

JD 440 ICD oil filter

I can not find the oil filter on this machine. Other posts say it is on the left of motor under tank and behind governor. Is it possible it was removed? I don't see any lines blocked off / missing. Anyone have a picture?
by mitchb
Sat Nov 18, 2017 12:14 pm
Forum: Early model JD crawler technical support
Topic: 440 ICD trans oil drain and egine oil.
Replies: 6
Views: 5423

Re: 440 ICD trans oil drain and egine oil.

I agree. I have the final drives and transmission drained. Just waiting for oil and fuel filters. Does the reverser have oil in it? I understood it was just used if you had a pto or winch on the back. Mine does have the little horizontal lever by the shifter.
by mitchb
Sat Nov 18, 2017 10:31 am
Forum: Early model JD crawler technical support
Topic: 440 ICD trans oil drain and egine oil.
Replies: 6
Views: 5423

Re: 440 ICD trans oil drain and egine oil.

Thanks, I did find it on the left side :D .
by mitchb
Fri Nov 17, 2017 2:50 pm
Forum: Early model JD crawler technical support
Topic: 440 ICD trans oil drain and egine oil.
Replies: 6
Views: 5423

440 ICD trans oil drain and egine oil.

Hello, I just purchased a 440 ICD. I am changing the transmission oil on it. Is the only drain the square head one on the bottom of the case?

Also, what should I run for engine oil? Is straight 30 ok?