Search found 13 matches
- Sun Sep 28, 2008 8:35 am
- Forum: Early model JD crawler technical support
- Topic: 420 axle seal tool
- Replies: 1
- Views: 2577
420 axle seal tool
Does anyone have any of these tools for sale. I remember reading that someone was going to have them machined and sell them. Please advise.
- Tue Feb 06, 2007 5:48 pm
- Forum: Show & Tell
- Topic: 420 Restoration
- Replies: 0
- Views: 3906
420 Restoration
Gettin' ready to put her back together.
- Thu Oct 19, 2006 3:53 pm
- Forum: Early model JD crawler technical support
- Topic: 2nd gear
- Replies: 0
- Views: 2024
2nd gear
Lavoy see postig of 9/29 has ser.# and other needed info.DozerDave
- Thu Oct 19, 2006 3:00 pm
- Forum: Early model JD crawler technical support
- Topic: Oil in rollers
- Replies: 4
- Views: 6133
oil for rollers
I have been using corn head grease for years without a problem. Close in viscosity doesn"t leak out. Dozer Dave
- Fri Sep 29, 2006 3:19 am
- Forum: Early model JD crawler technical support
- Topic: 420 Transmission Rebuild
- Replies: 2
- Views: 3687
Transmission Rebuild
Found a seal kit thru Deere. Will check with them on bearings. Thanxs for looking for that gear.
- Thu Sep 28, 2006 10:15 am
- Forum: Early model JD crawler technical support
- Topic: Track pin removal
- Replies: 8
- Views: 11292
Track Pin Removal
Had the same problem. Jacked the tractor up. loosed tracks up and used a large pry bar and slipped tracks over the frt. idler. Thus removing the tracks without breaking them. Than I was able roll the tractor around.
- Thu Sep 28, 2006 8:43 am
- Forum: Early model JD crawler technical support
- Topic: 420 Transmission Rebuild
- Replies: 2
- Views: 3687
420 Transmission Rebuild
Lavoy,
The trans is a 5 speed. Ser.# 115648 Please advise on the availability of the 2nd gear cluster, bearing kit for trans, and a seal kit.
Thanks Dozer Dave 420/350
The trans is a 5 speed. Ser.# 115648 Please advise on the availability of the 2nd gear cluster, bearing kit for trans, and a seal kit.
Thanks Dozer Dave 420/350
- Sat Sep 16, 2006 5:04 am
- Forum: Early model JD crawler technical support
- Topic: Rebuilding Transmission 420
- Replies: 1
- Views: 2775
Rebuilding Transmission 420
Need 2nd gear for a 420
- Sun Aug 06, 2006 7:32 am
- Forum: Early model JD crawler technical support
- Topic: MC Whats a good one worth
- Replies: 1
- Views: 2984
MC Whats a good one worth
Found a nice MC. Good runner, steers well, a few oil leaks and a liitle sheet metal damage. Tracks in good shape. Can you give me a ballpark range on its value.
- Mon Jan 16, 2006 4:39 pm
- Forum: Early model JD crawler technical support
- Topic: Front Idler Spacer bar
- Replies: 3
- Views: 4603
Spacer bars
Have you ever tried repairing the threaded ends, mine are eaten up very bad
- Mon Jan 16, 2006 3:37 pm
- Forum: Early model JD crawler technical support
- Topic: Front Idler Spacer bar
- Replies: 3
- Views: 4603
Front Idler Spacer bar
Anyone have any experience with replacing the spacer bar on the front idler . IE wear to get parts or to fabricate
- Wed Jul 13, 2005 5:10 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Upper idler shafts
- Replies: 2
- Views: 5305
Upper idler shafts
Lavoy. Did you get anymore upper idler shafts made yet or are complete upper idler assemb. avialable for a 420. Dozerdave
- Mon May 02, 2005 5:00 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Ordering Parts
- Replies: 1
- Views: 5269
Ordering Parts
How do I order parts from you?