Search found 36 matches

by yellowcrawler
Mon Oct 11, 2021 6:47 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Loader Parts Catalogs for sale
Replies: 0
Views: 211

Loader Parts Catalogs for sale

I have a group of loader parts catalogs for sale as a lot. $10 plus shipping. 1010 crawler loader PC704 1010 landscape loader PC868 2010 crawler loader PC705 350 crawler loader PC926 450 crawler loader PC927 700 loader PC699 710 loader PC700 720 loader PC701 740 loader PC702 300 (7300) loader PC979 ...
by yellowcrawler
Mon Dec 21, 2020 11:13 am
Forum: Off-topic discussions
Topic: Repacking Cylinders
Replies: 7
Views: 2842

Re: Repacking Cylinders

I have a 580D backhoe, the bolts are so difficult to break lose because of locktite. The heat will soften the locktite, making the bolt easier to remove. Something else I have done is to connect the shaft back to the machine, with a block of wood under it to protect the shaft, then use the socket, b...
by yellowcrawler
Sun Oct 11, 2020 7:27 pm
Forum: Early model JD crawler technical support
Topic: free 440 crawler loader
Replies: 7
Views: 2667

Re: free 440 crawler loader

Crawler was picked up, thank you.
by yellowcrawler
Thu Sep 24, 2020 5:09 am
Forum: Early model JD crawler technical support
Topic: free 440 crawler loader
Replies: 7
Views: 2667

Re: free 440 crawler loader

PM sent. Thanks.
by yellowcrawler
Wed Sep 23, 2020 12:57 pm
Forum: Early model JD crawler technical support
Topic: free 440 crawler loader
Replies: 7
Views: 2667

Re: free 440 crawler loader

How wide is the blade? Can a 16 foot trailer make it in?
by yellowcrawler
Thu Jan 30, 2020 4:05 pm
Forum: Off-topic discussions
Topic: Steam Boilers
Replies: 5
Views: 4043

Re: Steam Boilers

Having worked in the power industry and around Steam Units for many years, it is a very powerful source. It can be very dangerous also, surprisingly at lower pressures!
by yellowcrawler
Thu Oct 25, 2018 12:21 pm
Forum: Early model JD crawler technical support
Topic: carb problem
Replies: 45
Views: 18914

Re: carb problem

Lavoy is correct, originally the venturi fits tightly. I believe over time the venturi relaxes and loses the tight fit, that is why I used the sealer and it cured my problem. I believe the venturi is aluminum or pot metal while the carburetor body is cast iron.
by yellowcrawler
Tue Oct 23, 2018 5:24 pm
Forum: Early model JD crawler technical support
Topic: carb problem
Replies: 45
Views: 18914

Re: carb problem

https://www.scribd.com/doc/60666720/Mar ... air-Manual

Figure S-17 from the webpage above shows the venting around the venturi.
by yellowcrawler
Tue Oct 23, 2018 5:19 pm
Forum: Early model JD crawler technical support
Topic: carb problem
Replies: 45
Views: 18914

Re: carb problem

I believe I used permatex aviation gasket sealer. I used it in the past for Volkswagen engine cases and it worked great, I still have the same can from over 40 years ago! I wanted to use something impervious to gasoline but removable in case I needed to take it apart again. When you take the carbure...
by yellowcrawler
Mon Oct 22, 2018 5:03 pm
Forum: Early model JD crawler technical support
Topic: carb problem
Replies: 45
Views: 18914

Re: carb problem

I had the same problem with a marvel-sheibler carburetor on a different make of crawler. Since you had the carburetor apart, is the venturi removable? The problem I had is sealer is needed where the venturi seats. The area around the venturi vents to the atmosphere, so if it is not properly sealed, ...
by yellowcrawler
Fri Jul 06, 2018 9:28 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: jd440 parts available for sale
Replies: 9
Views: 5528

Re: jd440 parts available for sale

The oil pan/bellhousing combination reminds me of the Hercules 4 cylinder engines in the cleteac Oliver crawlers.
by yellowcrawler
Tue Dec 12, 2017 7:25 pm
Forum: Off-topic discussions
Topic: Case Backhoe Question
Replies: 6
Views: 3530

Re: Case Backhoe Question

I can second Dale at Tractor stuff. Very good to deal with, reasonable prices, new and used parts and very knowledgeable. Back to your question, to release the latch, could you use a come-along to release the tension? or back the dipper against a tree, then trip the release? I did a similar thing on...
by yellowcrawler
Thu Nov 10, 2016 4:34 pm
Forum: Early model JD crawler technical support
Topic: Hood for 440 ICD
Replies: 12
Views: 6323

Hood

The 440 IC and the 440 ICD hood dimensions are the same, the cutouts for the intake and exhaust are in different locations. The door for the radiator filler is in a different location also as I recall.
by yellowcrawler
Sat Aug 20, 2016 6:55 pm
Forum: Off-topic discussions
Topic: Our Sheep Farm: Not to Be
Replies: 6
Views: 4457

His work.

Reminds me of the old saying, "Give a man a fish, feed him for a day, teach him how to fish, feed him for a lifetime." Jesus worked with the fishermen and made them fishers of men. I am glad you shared the ministry and I believe it is a great thing to do at the right time. May the Lord richly bless.
by yellowcrawler
Mon Mar 28, 2016 6:42 pm
Forum: Off-topic discussions
Topic: Case 580 drive train parts sources?
Replies: 6
Views: 4698

I have a Case 580D backhoe and I used Tractorstuff in Indiana a few years ago, he has a lot of used parts. Was an excellent person to work with. website www.e-backhoeparts.com