JDcrawlers Messageboard

I think I’ll try and add on that 4th cylinder today. More power is more better!

Also a shoutout to BTown
Thank you sir

Ok injector pump back on successfully. Took about 5 seconds of key on for a good start. Ran a little rough for about 15 seconds and then evened out and runs perfectly now. No injector bleeding necessary Hit the key now and it starts immediately like it always has . I Let it idle for half hour and no...

Yes I’m definitely an amateur. The pumps back on and am currently hooking everything back up

Ok well that seems to have worked. After 1 more rotation, the 2 dots now line up nicely! Thank you JimB! It’s disappointing that the maintenance manual doesn’t reference this situation Seems to me like that should have been explained right away. I’ll make a note of it and place it in my manual Time ...

Ok here I go! I’ll let you know
Thanks

Hello Jim B
Are you saying that I should rotate the flywheel 1 more rotation, pin it, and then the engine and pump should now be timed properly. This would mean the 2 dots and the cam timing lines should line up??

Yes it is a3 cylinder and as far as I know if this engine is pinned, it will be #1 TDC.

I have a straight 350 crawler from 1966. I removed the fuel injector 2 weeks ago to replace both of the throttle shaft o- rings due to nuisance leakage. This was my first time ever removing an injector pump. I barred the engine over and installed the pin in the flywheel for TDC and noted that the ca...

Ok Thanks Jim I will look into that!

1966 jd350 track loader with power steering. Used it quite a bit last summer building a road on our property. Had to frequently add fluid (hydraulic) to the power steering reservoir. Could not locate any significant leaks in the power steering system anywhere until I checked the engine oil level and...

I am highly experienced in breaking

Ok Thanks for the advice.
If it ain't broke, ,,,,,,,,,

Hi Everybody I'm thinking of doing some preventive maintenance this spring on the fuel injectors. As far as I know, they've not been pulled out and cleaned since we' ve owned this machine ( almost 30 years) I'm no mechanic! My question is , can i simply pull these injectors out, replace the screen (...

Hey Mxzfx4 Thanks for your previous advice. I found the panel between the track and battery box you mentioned. I never new it was there. I did get my steering cylinder changed. I took off the seat frame and that flat bar that helps supports the armrests of the cab. When all of that is out of the way...