JDcrawlers Messageboard

I am having trouble finding a radiator cap that is the right size the one I have is to short

Push twirls the back of The dozer with the ball joint off

I m doing a 67 at the moment and when it contacts the clutch fingers you will not be able to move the arm ... do to leverage correct me if I am wrong anyone ... everyone has been tons of help on here

Ty I have yet to get a manual but I am going to order one this week

Is the spring under the adjuster or down further on the shaft

There is no spring tension on the right steering clutch arm that moves the throw out bearing ... the side that has sticky steering ... the left side steers great and has spring tention on it ... is there a spring inside the throw out bearing housing to retract it... like the one on the engine transm...

Yes I was trying to find out what winch I have .... a case of brake cleaner later and 23701 is stamped on the top of the winc
You are saying it is a 3315

Three numbers now T 18586T on the inside of inspection cover plate

There is two sets of numbers T 19801t is above inspection cover
T19800T is on the brake band side

T19800T

Winch oil what type hydro trans... I don’t have a manual yet sorry

It steers to the right if I crank down the brake adjustment ... I am leaning towards the pressure plate fingers are a bit out of wack ... tinkered on her most of the day but due to the weather it never left the garage .... I think I can adjust them in just a little and gain the release I need to ful...

Sorry .... the lever returns forward fine .... it is acts like the
Lever is still pulled the dozer wants to keep turning to the right

Right side steering clutch sticks after turning to that side it will free up if I wiggle the other side or back up and pull forward I have the cultches adjusted to what I believe to be pretty good it has free play and will coast backwards on a hill be for the brakes grab.... could the linkage be sti...