JDcrawlers Messageboard

Did you ever sell this little crawler?

Location
Overall condition
UC condition

I'm looking for a good used mechanical tachometer for a little John Deere 350C dozer. I bought a new cable but soon realized why the cable was broken. Also looking for a good used hour meter. Thanks

Good afternoon everyone. I FINALLY got the little 350C back together, filled everything with oil, started and checked for leaks (had a few), bled lines, allowed engine to get warm and went to change the engine oil and stumbled headlong into a problem. When I pulled the engine to do this repair I did...

So, does anyone have any experience with the cheaper aftermarket couplings? Can anyone confirm I have the correct part number?
Perry

With the amount of labour involved to replace why not go new. We have went as far as welding 2 new couplers together and then cutting to maximum length to avoid future rebuilds. We ran Widepads with hoes and turned up to 3-179 engines so we took ever step to improve longevity and reliability. You c...

Jim B wrote: ↑

Fri Dec 06, 2019 5:55 pm

Where are you located?

I am in the River Valley area of Central Arkansas, Dover/Russellville

I need a coupling for a JD350C dozer. The coupling goes between the reverser and the tranny. Best I can tell from looking at part numbers the part I need is T14923. I have found some online for $50-$75 but don't have much confidence in the quality of steel used and don't want to do this again any ti...