JDcrawlers Messageboard

6 volts positive ground do I need to polarize this new regulator. if so I put a jumper wire between "BAT" TERMINAL TO "GEN" OR "ARM" A SMALL SPARK WILL OCCUR JOB COMPLETE PLEASE ADVISE THANKS !

thanks ! tim tldec50

I well take pictures over the weekend and send them to you please be safe and thanks for all the help / toots1 and lavoy

Yes the brake band was fromlavoy wilcox it was on December 14, 2019 invoice has no number.it coast $240.00 along 4- M891T SPRING $32.00,1-M1636T TUBE $40.00 ,1--M903T SPRING $8.00 ,1-M904T PIN. FREIGHT $18.95 TOTAL $339.95 THANKS DTOOTS1/ I WELL HAVE MY SON HELP TAKE PICTURES AND DOWN LOAD THEM TO YOU

yes i did the pressure plate it was done with gauge tool. put it together can't move the lever steering right so i took it apart and that is what the problem is. the brake band is to tight around the brake drum and the lower right side were the dowle is on housing. thanks

Is there a video on the 420c final drive how to install and make said adjustment's. the lavoy way is the right way no ! Thanks ! too all

THANKS DTOOTSL 1 I GIVE IT A SHOT SEE HOW IT GO'S

WHEN INSTALLING A NEW BRAKE BAND. WHY IS IT SO TIGHT BETWEEN THE HOUSING DOWLE PIN ON THE LOWER RIGHT SIDE AND THE BRAKE DRUM. ( CAN'T TURN AT ALL BY HAND ? ) MAKE ALL ADJUSTMENTS BEFOR PUTING THE RIGHT SIDE FINAL DRIVE BACK IN PLACE PLEASE HELP THANKS !

I would like to know is my crawler a ( NEGATIVE GROUND) OR ( POSITIVE GROUND ) the coil, ignition (NEGATIVE WIRE) Go,s to distributor housing. and the coil, ignition ( POSITIVE WIRE ) Go,s to IGN. switch can some one help. please advise with a explanation so i can understand why ??? Thanks !

I am in need of the part PAGE # 35-2 -key#7 P/N #JD-8134D OUTER TAPERED CONE BEARING & SNAP RING. Who would know the size of the upper shift 1-1/4" or 1-1/8" I also cant find the track master pin "help" Thanks !