Search found 26 matches
- Sun Oct 25, 2020 10:07 am
- Forum: Show & Tell
- Topic: Lindeman brake bands
- Replies: 5
- Views: 16461
Re: Lindeman brake bands
I had no problem viewing the photos. Nice job!
- Sun May 10, 2020 5:34 am
- Forum: Early model JD crawler technical support
- Topic: 1010 will not fire
- Replies: 10
- Views: 7701
Re: 1010 will not fire
Sounds like your timing is off.
- Wed Dec 11, 2019 6:42 am
- Forum: Early model JD crawler technical support
- Topic: 440 Crawler Radiator Support Removal Help Needed
- Replies: 2
- Views: 2665
Re: 440 Crawler Radiator Support Removal Help Needed
If you are referring to the " peg " that is sticking out from the front engine mount they are pressed in. Drive them out from the inside out. Had to do one on my 440 due to the mounting bolt being broken.
Al
Al
- Thu Jan 31, 2019 11:11 am
- Forum: Off-topic discussions
- Topic: Ohio Weather
- Replies: 8
- Views: 10532
Re: Ohio Weather
Up here in the frozen north of MN I had the coldest I've had so far, -41. I'm ready for spring!
- Thu Jan 24, 2019 11:27 am
- Forum: Late model JD crawler technical support
- Topic: 350 slope board
- Replies: 6
- Views: 5314
Re: 350 slope board
Check this out. Hope it helps.
http://www.rocklandmfg.com/index.php?pa ... lope-board
http://www.rocklandmfg.com/index.php?pa ... lope-board
- Sat Dec 01, 2018 12:21 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Track Adjustment
- Replies: 6
- Views: 6154
Re: 450C Track Adjustment
Has to be a bad zerk fitting. They have a check ball in them to prevent what you are experiencing. Try another fitting.
- Fri Nov 23, 2018 7:08 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
You guessed wrong. I had put a new load jet in it. It was part of the carb kit that I bought from Lavoy. EVERY hole and orifice was thoroughly cleaned multiple times - there was not a speck of dirt in it. I had even ran the tip cleaner from my set of torches into every opening looking for anything t...
- Wed Nov 21, 2018 12:32 pm
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
Believe me, I tried this same thing several times with my carb but could not find/fix the problem with it. Whatever was wrong with it will remain a mystery.
- Sun Nov 18, 2018 8:05 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
Thanks for the link but I had already printed this thinking it would help me with my problem but replacing the carb was the only solution,
- Sat Nov 10, 2018 6:39 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
Had to send it back for a core charge.
- Fri Nov 09, 2018 10:56 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
UPDATE - replaced the carb with a rebuilt and my dozer runs like a charm! Tried it out by pushing out a pine stump from a tree that had blown over from a storm this summer and it didn't hesitate one bit. I had even sprayed some paint on the machine to make it look pretty.
- Tue Oct 30, 2018 6:20 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
Update - rebuilt the carb installing all new parts from a carb kit but still have the same problem. If I ever figure this thing out I'll let everyone know. Leaning towards replacing the carb if I can find one. Wish me luck!
- Thu Oct 25, 2018 9:34 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
Lavoy, I sent you another P.M. I would like to purchase a kit for this carb to see if that will fix it.
- Thu Oct 25, 2018 6:18 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
Venturi can only go in one way - one end is larger than the other.
- Wed Oct 24, 2018 11:31 am
- Forum: Early model JD crawler technical support
- Topic: carb problem
- Replies: 45
- Views: 35560
Re: carb problem
When my carb is all together the venture will not move, so I assume that it is sealing. I sent you a P.M.