JDcrawlers Messageboard

That what I figured. I don't think either one has been moved since it was built lol.

Any of you guys have any pointers in getting throw out bearing fork out of steering clutch housing? I took the set screw out but it isn't budging. I even used heat.

Yeah lavoy didn't have anything. I can use my ring gear with the hub that is with the ring gear I found. I think I would bolt it instead of rivets though.

Yeah I missed the spines the first couple times I pulled the left side apart :? When the issue continued I new it had to be something else. The spines to the outside of the hub are good so really had to look in there to see. The shaft is fine surprisingly. Anyone know where I might find a hub? Can't...

Well I figured out I need the hub the ring gear mounts to. How big of deal is that to take out. I assume I have to pull both sides apart then the rear end.

Does anyone have a good used brake drum for a 350 they would be willing to sell? I'm located in North central wv.

When I first put it together I have to use a bar to turn it but then it's like it lets loose and I can turn it by hand. The pressure plate is new and triple checked. I can see the drum trying to turn but won't. I think I'm going to check the thickness of my new clutch disc.

Well checked everything out and the brake drum wasn't turning with that side off the ground the other side tied off. Band was loosened up and steering lever completely unhooked. Tore it all apart and double checked it all and all looked good. Put it back together and fired the dozer up and tried it ...

Thanks for the reply. I never got the track back on it yet so won't be too bad to get to. I was kinda thinking it might be in the final but was hoping not. Will check it out maybe tonight.

Hello all. I currently have a 65 jd 350. I was pushing with it the other day and lost power to the left side. Figured the clutches went out so replaced them plus pressure plate. I still have no power to that side. Seemed like I had it briefly but then nothing. Am I missing something? I adjusted the ...