Search found 23 matches

by Jirving43
Sun Jun 16, 2019 9:01 pm
Forum: Early model JD crawler technical support
Topic: Clanking trans
Replies: 6
Views: 1248

Re: Clanking trans

So it does it in 1,2,R the clunk is one time per revolution of the trans input shaft, both front and rear bearings and races on input shaft are new. The gears in case have some wear but nothing terrible, no broken teeth and neither of the other transmission shafts feel loose.
by Jirving43
Tue Jun 11, 2019 3:27 pm
Forum: Early model JD crawler technical support
Topic: Clanking trans
Replies: 6
Views: 1248

Clanking trans

In my 59 440 ICD (Studebaker powered NO REVERSER) I have a clanking noise in R,1,2,3 gears in forward and reverse.. All gears look ok when I pull the shifter cover off.. Any ideas?
by Jirving43
Mon May 20, 2019 11:26 pm
Forum: Early model JD crawler technical support
Topic: Videos
Replies: 8
Views: 2986

Re: Videos

Yep that's me.. Or may be easier to search by my name. Jay Irving.. Look for dozer.. I'm not a singer or a black basketball player.
by Jirving43
Sat May 18, 2019 10:46 am
Forum: Early model JD crawler technical support
Topic: Videos
Replies: 8
Views: 2986

Re: Videos

I removed it and reinstalled it last night seems like it works fine now.
by Jirving43
Fri May 17, 2019 11:15 am
Forum: Early model JD crawler technical support
Topic: Videos
Replies: 8
Views: 2986

Videos

I finished my John Deere 440 STUDEDEER project and am gonna go push dirt today. I uploaded the videos I took durring construction onto YouTube.. just search John Deere 440.. they will be the newest uploads since I put them on there today.. enjoy and thanks for the help from everyone!
by Jirving43
Wed Apr 24, 2019 4:48 pm
Forum: Early model JD crawler technical support
Topic: Lift cylinder seals..
Replies: 5
Views: 2511

Re: Lift cylinder seals..

Can you still get reseal kits for angle and tilt cylinders?
by Jirving43
Tue Apr 23, 2019 8:05 pm
Forum: Early model JD crawler technical support
Topic: Lift cylinder seals..
Replies: 5
Views: 2511

Lift cylinder seals..

So both my lift rams were leaking at wiper seal... I replaced the seals and the o-ring.. Both side.. When firing it back up any slowly cycling the cylinders it blew both wiper seal out of the Damn cast iron housing! ... Wtf! Is there a trick to this?... The left side I tapped back in and its fine.. ...
by Jirving43
Tue Apr 23, 2019 7:57 pm
Forum: Early model JD crawler technical support
Topic: Winch
Replies: 3
Views: 2115

Re: Winch

I replaced the seals on hydraulic side.. It powered in then when I tried to power out it lugged the hyd pump then blew the seal out. So it got disconnected and plasma cut off.. Like ya said impossible to find parts..
by Jirving43
Sun Apr 21, 2019 9:39 pm
Forum: Early model JD crawler technical support
Topic: Winch
Replies: 3
Views: 2115

Winch

I have a gearmatic 11 SCL hydraulic winch on back of my 440.. I hooked the hoses up to try it out and is leaking right at the flange on left side of winch. Anyone know where to find parts for this kinda winch I can't seem to really find anything online
by Jirving43
Wed Apr 17, 2019 11:18 am
Forum: Early model JD crawler technical support
Topic: 440 icd steering adjustment
Replies: 3
Views: 2233

Re: 440 icd steering adjustment

I guess the screwdriver pic figure 170-5-3 is for that top brake band adjustment. I had watched a video for adjustment on a 450 and thought they were the same.
by Jirving43
Wed Apr 17, 2019 8:56 am
Forum: Early model JD crawler technical support
Topic: 440 icd steering adjustment
Replies: 3
Views: 2233

440 icd steering adjustment

So first of yes I have the book... That being said the book sucks.. Can someone please send me a picture via email or text as to the mythical place that the screwdriver goes to put the throw out bearing in correct position to then tighten the 1/2" bolt on the throw out bearing adjuster.. I've wedged...
by Jirving43
Thu Feb 28, 2019 1:45 pm
Forum: Early model JD crawler technical support
Topic: Tracks 440
Replies: 1
Views: 760

Tracks 440

So on my 440 I have 4 bolts per track pad. So I assume these chains are from something else? I've looked several times and don't seem to see a pin that's beveled or that has a c-clip indicating a master pin. Right sides gotta come off track adjuster needs new seal..
by Jirving43
Thu Feb 28, 2019 12:55 pm
Forum: Early model JD crawler technical support
Topic: 440 Parts.. In Alaska
Replies: 10
Views: 2086

Re: 440 Parts.. In Alaska

Look on eBay and amazon, really easy, plus I have a lot of spare parts already.
by Jirving43
Tue Feb 19, 2019 11:11 pm
Forum: Early model JD crawler technical support
Topic: 440 Parts.. In Alaska
Replies: 10
Views: 2086

Re: 440 Parts.. In Alaska

Oh there is no JD bellhousing.. It goes Studebaker engine/Studebaker trans/baby drive shaft/Studebaker yoke splined to input shaft driving the john deere trans.. Wish I knew how to post pictures on here Its actually a really nice fit. 8)
by Jirving43
Tue Feb 19, 2019 11:06 pm
Forum: Early model JD crawler technical support
Topic: 440 Parts.. In Alaska
Replies: 10
Views: 2086

Re: 440 Parts.. In Alaska

Lol,. I've got $100 into it and I've got a running 440 on Studebaker power.. Just need to put the radiator back in it and order up my hydraulic pump. Once that pump is installed I can adjust the brake band's and clutch linkage and see if I need to call you again and order up some parts or not. :shock: