Search found 10 matches
- Sat Feb 16, 2019 1:41 pm
- Forum: Late model JD crawler technical support
- Topic: Steering Booster assembly
- Replies: 5
- Views: 3688
Re: Steering Booster assembly
The two cylinders look identical but on the back side the cylinder on the left side appears to be out further like it’s not releasing all the way! We adjusted the brake and clutch to manufacture specs but it actually had no brake on the left side when we did! The brake adjust bolt is fully threaded ...
- Sat Feb 16, 2019 12:52 pm
- Forum: Late model JD crawler technical support
- Topic: Steering Booster assembly
- Replies: 5
- Views: 3688
Re: Steering Booster assembly
Thank you for the info! I’m very new to this I honestly didn’t know where I was posting I will watch it from now on! I’m gonna try swapping them and see if it makes any difference! Would the booster sticking on the left side have anything at all to do with the drive not working on the left side?
- Sat Feb 16, 2019 12:13 pm
- Forum: Late model JD crawler technical support
- Topic: Steering Booster assembly
- Replies: 5
- Views: 3688
Steering Booster assembly
Where can I get a rebuild kit for a hydraulic steering booster for a JD 350 dozer?
- Fri Feb 15, 2019 8:09 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 left side track barely drives
- Replies: 12
- Views: 8934
Re: JD 350 left side track barely drives
One more thing the power steering cylinder on the right side works perfectly when you pull back on the lever, it goes back smooth and I can feel the hydraulics kick in! The cylinder on the left is tighter and doesn’t go back as far as the one on the right. What would cause this?
- Wed Feb 13, 2019 9:46 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 left side track barely drives
- Replies: 12
- Views: 8934
Re: JD 350 left side track barely drives
B town
Does all 350’s vary on how many discs are required? When I’m reading seems they all are required to have the same on each side? Or was you just saying he may have just like left one out not knowing what he was doing?
Does all 350’s vary on how many discs are required? When I’m reading seems they all are required to have the same on each side? Or was you just saying he may have just like left one out not knowing what he was doing?
- Wed Feb 13, 2019 7:30 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 left side track barely drives
- Replies: 12
- Views: 8934
Re: JD 350 left side track barely drives
Okay thank you
- Wed Feb 13, 2019 5:38 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 left side track barely drives
- Replies: 12
- Views: 8934
Re: JD 350 left side track barely drives
Thank you all I was afraid of this! How do I go about ordering parts from him?
- Wed Feb 13, 2019 4:27 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 left side track barely drives
- Replies: 12
- Views: 8934
Re: JD 350 left side track barely drives
Thank you all for the info the caps that go over the compartment were the adjustments take place were left off, when I operate the machine, I can herr sizzling in the left final drive housing and smell something heating up! I figure it’s gotten water down in the housing!
- Wed Feb 13, 2019 4:23 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 left side track barely drives
- Replies: 12
- Views: 8934
Re: JD 350 left side track barely drives
The previous owner had both sides replaced at the same time !
- Wed Feb 13, 2019 2:26 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 left side track barely drives
- Replies: 12
- Views: 8934
JD 350 left side track barely drives
Hello everyone! I recently purchased a JD 350 dozer! The steering clutches were replaced the right side drives and steers perfectly! The left side will brake and barely drive until it’s under pressure then it has no drive! I have attempted To adjust them by the manual specs but it didn’t improve! An...