Levoy thats great, would you have the seals (AM 2011 T) on hand also?
going to be more, getting a list going. will contact you soon.
Search found 9 matches
- Thu Feb 01, 2024 8:31 pm
- Forum: Early model JD crawler technical support
- Topic: 420C front idler size difference
- Replies: 6
- Views: 4683
- Wed Jan 31, 2024 7:45 pm
- Forum: Early model JD crawler technical support
- Topic: 420C front idler size difference
- Replies: 6
- Views: 4683
Re: 420C front idler size difference
Yup, 32 pads, so they are the "optional" ones. Did find something strange on the right ideler, the axel is a two part set up with a "supposed to be" solid inner axel, its snapped in half where there was a pin through it which tied it to the large bore cylinder which rode on the bushings. I have thre...
- Mon Jan 22, 2024 10:39 pm
- Forum: Early model JD crawler technical support
- Topic: 420C right steering clutch slippage.
- Replies: 3
- Views: 4458
Re: 420C right steering clutch slippage.
Thanks guys, going to look down there tomorrow with a line camera, suspect I will
find contamination. More questions to come I'm sure.
find contamination. More questions to come I'm sure.
- Sun Jan 21, 2024 6:59 pm
- Forum: Early model JD crawler technical support
- Topic: 420C right steering clutch slippage.
- Replies: 3
- Views: 4458
420C right steering clutch slippage.
new development in steering department. I suspect new clutches are in order but interested in other thoughts. I have had no problems with right steering clutch untill last summer, would work fine at first but the longer I ran dozer the more slippage I experianced. By the end of 1-1/12 hrs when pushi...
- Sun Jan 21, 2024 6:41 pm
- Forum: Early model JD crawler technical support
- Topic: 420C front idler size difference
- Replies: 6
- Views: 4683
Re: 420C front idler size difference
Thanks Mike, going to count pads and see where I am at.
- Sat Jan 20, 2024 8:09 pm
- Forum: Early model JD crawler technical support
- Topic: 420C front idler size difference
- Replies: 6
- Views: 4683
420C front idler size difference
Just started a "time to fix" stuff on my 1957 420C. Front idlers are rough and I acquired a set theoretically off same vintage 420. When I removed mine and placed side by side I noticed a difference. Mine are 21" in diameter and replacements are 19" in diameter. Did JD make different size idlers for...
- Thu Dec 10, 2020 8:06 pm
- Forum: Early model JD crawler technical support
- Topic: 450 parts for a 420C
- Replies: 3
- Views: 3030
Re: 450 parts for a 420C
Thanks Lavoy,
Yaa, kinda figured that, oh well was worth a try.
Will be starting on the right side drive on the 420 soon so will be in contact for parts, your assistance on the left side was greatly appreciated last winter.
Jerry
Yaa, kinda figured that, oh well was worth a try.
Will be starting on the right side drive on the 420 soon so will be in contact for parts, your assistance on the left side was greatly appreciated last winter.
Jerry
- Thu Dec 10, 2020 8:42 am
- Forum: Early model JD crawler technical support
- Topic: 450 parts for a 420C
- Replies: 3
- Views: 3030
450 parts for a 420C
Just a shot in the dark but have chance to pick up some rollers and front idlers from a 450, is it possible to retrofit them onto a 420C.
Thanks
Thanks
- Thu Mar 12, 2020 7:38 pm
- Forum: Early model JD crawler technical support
- Topic: Thanks to the site.
- Replies: 0
- Views: 4283
Thanks to the site.
Thanks. Just wanted to say thanks to the site and in particular to lavoy. I am new to the crawler world in that I picked up a " rode hard and NOT put away" 420 a bit ago. Gathered a lot of info from the site and spoke with Lavoy about what I needed, I really appreciated the time, information, and pa...