Search found 7 matches
- Wed May 29, 2019 10:42 am
- Forum: Late model JD crawler technical support
- Topic: Jd 9300 backhoe
- Replies: 6
- Views: 71950
Re: Jd 9300 backhoe
Good to know that everything works fine not using the reservoir on the hoe. I was scared of heat being the reservoir is HUGE on the hoe. Thanks for the information guys. I am going to plug the reservoir on the hoe and leave it full if diesel and atf to slosh around for a year. I do NOT want that tan...
- Tue May 28, 2019 10:24 am
- Forum: Late model JD crawler technical support
- Topic: Jd 9300 backhoe
- Replies: 6
- Views: 71950
Re: Jd 9300 backhoe
Oh and the reservoir is part of the hoe, not some add on.
- Tue May 28, 2019 10:23 am
- Forum: Late model JD crawler technical support
- Topic: Jd 9300 backhoe
- Replies: 6
- Views: 71950
Re: Jd 9300 backhoe
He said nothing had been changed on the valve for the hoe, i asked about that due to being closed center system. I need to blow air through the hoe and make sure the valve is open. But, you CANNOT run closed center valve on open system, but you can run an open center valve on closed center system (n...
- Tue May 28, 2019 8:39 am
- Forum: Late model JD crawler technical support
- Topic: Jd 9300 backhoe
- Replies: 6
- Views: 71950
Jd 9300 backhoe
Almost done cleaning up the reservoir on my brand new used 9300 hoe. It appears tight with no leaks. The guy i bought it off of ran it on a 4020 and it was all that tractor wanted. Question for folks is, what possible reason do people bypass the hoes hydraulic tank?? If it doesn’t leak and all, usin...
- Fri May 24, 2019 5:58 am
- Forum: Late model JD crawler technical support
- Topic: Tilting Hard nose on 450c dozer
- Replies: 5
- Views: 5652
Re: Tilting Hard nose on 450c dozer
How do i go about loading pictures on here???
- Fri May 24, 2019 5:56 am
- Forum: Late model JD crawler technical support
- Topic: Tilting Hard nose on 450c dozer
- Replies: 5
- Views: 5652
Re: Tilting Hard nose on 450c dozer
Thanks lab, that lower bolt that goes through that wishbone looking bracket clearance is so tight on this dozer model i cant even sneak a wrench in there. Got busy doing a service on the rollers, carrier and idlers last night and never messed with the nose because i wanted an easy win. That what im ...
- Thu May 23, 2019 10:00 am
- Forum: Late model JD crawler technical support
- Topic: Tilting Hard nose on 450c dozer
- Replies: 5
- Views: 5652
Tilting Hard nose on 450c dozer
Question on proceeding here, 450c with six way blade, pretty new to this machine. I have the service manuals and all but not much is mentioned on this front. Do i need to remove anything other than the filter bracket to do this? The side bolts look really close to the blade frame no matter what posi...