JDcrawlers Messageboard

Found a guy 1h from me that has one but the casting is m-938-t my casting is m2361t . Im nut shure they fit the info i find on m938t is for mc and early 40. Can someone confirm this

You are not going to be proud of me. I had to remove the right stop bracket to reinstall the track housing on the bull. One of the bolt holding it broke. I was too eager to try it and didnt tought it would make that much difference if it wasnt there for my little ride 😔😔 i will install it back with ...

Ok seems a did a really good job in reajusting the steering clutch. So much better grip that i exploded the final drive housing on me first real pull of a large tree so which is better 40c or 420c housing?

Thanks thats exactly what i needed

Need the size of the fitting on the oil pump where the pressure line connect. Parts j of figure 180-25-5 of the shop manual page 180-25-4. Just stripped mine and im unshure of the dimension. Thanks

Keys there but worn down. Theres medium to major wear on this think so just retorquing the bolt will have to do has i dont want to spend to much on it. Found out today that oil change where optionnal on it, even the oil filter plate are all mest up. Sad but that one is not worth a complete restaurat...

Found the trouble. The bolt that hold the pedal to the clutch shaft was not torqued enough. Found out after having removed the transmission extension 😕 anyway i took the time to clean clutch and brake shaft that where dragging together. Now it all loose and well lubricated. So im half way to having ...

Bummer i tough it was a real washer not felt. The clutch fork are adjusted with the jd7 tool so trouble is not there but i have a fare amount of play in the clutch pedal shaft. Anyway ill have no choice but to remove the engine to go see what happening. At least i checked it has soon has the engine ...

Numver 12 is what im talking about. Now i just need to remove the engine again to check if its there. Maybe they didnt put it back on when they did the clutch. Thanks for confirming

The adjustement for the clutch is at the max so ill have to remove and see if the shim behjnd the bearing is there. Can someone confirm me that the image in the shop manual is correct and that theres suppose to be a shim behind the throwout bearing and if you have the dimension. If not there ill mak...

Seems i didnt made the adjustement correctly for the steering clutch, all work well know except for the bearing being at 3/4 of the adjustement (probably the worn clutch i suppose). the engine clutch ill have to remove again the engine. in the shop manual i see a washer behind the throw out bearing,...

hi guys i just adjusted all the clutch on my 40c that i bought last summer with the jd7 tool, now the main clutch was new when i removed the engine but the lever where way high had about 3/8 between tool and flywheel, had washer between pressure plate and flywheel that i removed, the adjustment for ...