Search found 6 matches
- Wed Sep 11, 2019 4:46 pm
- Forum: Late model JD crawler technical support
- Topic: Hydraulic cylinder disassembly
- Replies: 5
- Views: 3993
Re: Hydraulic cylinder disassembly
Putting pressure on the cylinder worked. Thanks for the advice!
- Wed Sep 11, 2019 7:37 am
- Forum: Late model JD crawler technical support
- Topic: Hydraulic cylinder disassembly
- Replies: 5
- Views: 3993
Re: Hydraulic cylinder disassembly
Ok, we can drop the pin back in at the blade and apply pressure. Hopefully that will work. I just ordered the 1404...
- Wed Sep 11, 2019 6:55 am
- Forum: Late model JD crawler technical support
- Topic: Hydraulic cylinder disassembly
- Replies: 5
- Views: 3993
Re: Hydraulic cylinder disassembly
Thanks Jim, I’m beginning to think I should have bought the 1404 manual. I will have to check if the guide is turning with the nut. If it is, how do I get the nut loose?
- Tue Sep 10, 2019 8:09 pm
- Forum: Late model JD crawler technical support
- Topic: Hydraulic cylinder disassembly
- Replies: 5
- Views: 3993
Hydraulic cylinder disassembly
I’m trying to rebuild the angle cylinders on my 450G and can’t figure out how to get the spanner nut off the end. Is there a trick to it? I thought it was threaded and would just turn out. For some reason mine is spinning but not coming out of the cylinder body. It broke loose fairly easy, but now j...
- Sun Sep 08, 2019 10:35 am
- Forum: Late model JD crawler technical support
- Topic: Steering clutch help...
- Replies: 3
- Views: 2605
Re: Steering clutch help...
Thanks Jim. I’m in NW Arkansas. As far as the brakes, I only adjusted the wheel at the brakes. Just a couple of clicks and it seems to have plenty of braking power. I could mash the pedal almost to the floor previously. I have the 1403 manual if I remember correctly.
- Sat Sep 07, 2019 6:18 pm
- Forum: Late model JD crawler technical support
- Topic: Steering clutch help...
- Replies: 3
- Views: 2605
Steering clutch help...
Hi all, new guy here. I have a 1996 450G that has decided to stop turning left. I’ve adjusted the brakes and you can hear the engine pull down when you hit the left pedal, but the clutch obviously isn’t disengaging. I’m a pretty handy mechanic, but am new to heavy equipment and hydraulics. I have th...