Search found 157 matches
- Fri Apr 05, 2024 8:36 am
- Forum: Early model JD crawler technical support
- Topic: Rebearing bevel gear shaft- 440 ic
- Replies: 1
- Views: 821
Re: Rebearing bevel gear shaft- 440 ic
An update to my request for thickness of gaskets on bevel gear bearing quills. I made my own(.029 thick) will allow that for ea side. Also when i went to install power shaft ( 5 spd trans ) to set up pre load, found cluster gear would start to seize, removed all gears from this shaft, reinstalled an...
- Tue Apr 02, 2024 11:15 pm
- Forum: Early model JD crawler technical support
- Topic: Locate main bearings source
- Replies: 6
- Views: 323
Re: Locate main bearings source
I have a set of .010 under, new main bearings, from my 440 jd. Had extra. Will sell trade as long as someone can use them.
Send me message to. scork@ goldcity.net.
Send me message to. scork@ goldcity.net.
- Sun Mar 03, 2024 12:53 pm
- Forum: Early model JD crawler technical support
- Topic: Rebearing bevel gear shaft- 440 ic
- Replies: 1
- Views: 821
Rebearing bevel gear shaft- 440 ic
On a 440 ic- 442172 bevel gear bearing quills, does anyone know how thick the original m811t gaskets are. If I knew that, it might save me from removing the side bearings one more time.
I am rebearing the bevel gear assembly( actuall the whole transmission)
Thank you
I am rebearing the bevel gear assembly( actuall the whole transmission)
Thank you
- Sun Feb 26, 2023 12:08 am
- Forum: Early model JD crawler technical support
- Topic: Main Bearing
- Replies: 3
- Views: 4781
Re: Main Bearing
I have a set of rod and main bearings, they are from my 440 ic gas, they are brand new, i ended up with 2 sets for my rebuild.
I will check tomorrow and see what size they are, maybe you could check and see if they are the same for a 440 gas, and your 1010?
I will check tomorrow and see what size they are, maybe you could check and see if they are the same for a 440 gas, and your 1010?
- Fri May 01, 2020 6:22 pm
- Forum: Early model JD crawler technical support
- Topic: Detroit diesel
- Replies: 2
- Views: 3178
Re: Detroit diesel
Sounds like a fuel problem. Yes filters, first. Next plugged line etc. Fuel cap breather hole plugged ?
- Fri May 01, 2020 4:06 pm
- Forum: Early model JD crawler technical support
- Topic: Safety Block - Tracks Seizing
- Replies: 4
- Views: 4195
Re: Safety Block - Tracks Seizing
Maybe drain left hand final drive and see if there is any chunks of metal come out. Have a low walled drain pan that will hold about 1 gallon. Not sure how much oil for sure, but 1 gal is close. Maybe drain right also( in a separate pan) so you can see each and keep them separate.
- Thu Apr 30, 2020 9:46 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 28802
Re: 450c 6-way fittings?
Am very happy to hear it all worked out for you.
- Wed Apr 29, 2020 9:40 am
- Forum: Late model JD crawler technical support
- Topic: New to JD Crawler
- Replies: 4
- Views: 3820
Re: New to JD Crawler
And welcome!
- Wed Apr 29, 2020 9:39 am
- Forum: Late model JD crawler technical support
- Topic: New to JD Crawler
- Replies: 4
- Views: 3820
Re: New to JD Crawler
Contact Lavoy on this site, he has a JD store and repair shop.
Maybe post on section “late model JD “ for your needs and help, on this site.
Maybe post on section “late model JD “ for your needs and help, on this site.
- Wed Apr 29, 2020 8:03 am
- Forum: John Deere crawler FAQ's
- Topic: Crawler Service Manual and Parts Catalog list
- Replies: 18
- Views: 50153
Re: Crawler Service Manual and Parts Catalog list
Stan, thanks for the list( that takes a lot of time) I have that SM- JD 2037 for 2000 series machines, and I don’t see that number in your list?? It is a JD publication and came with my 440ic (442172) when I bought crawler. Don’t know why previous owner had it with the 440ic manuals, parts, service,...
- Tue Apr 28, 2020 5:07 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 28802
Re: 450c 6-way fittings?
Yes. Some valves are like that
- Mon Apr 27, 2020 7:19 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 28802
Re: 450c 6-way fittings?
That sounds better! Yes install the washer and your 3 thin shims, then let us know what your pressure becomes!
- Mon Apr 27, 2020 5:35 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 28802
Re: 450c 6-way fittings?
Is that washer thicker than .010”? The thin washers are .010” the washer should be close to .050”.
- Wed Apr 22, 2020 8:08 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 28802
Re: 450c 6-way fittings?
You will find problem. I think with hyd systems acting up, right after someone that shouldn’t have been working on the system, because of lack of knowledge, is like playing with a jig saw puzzle with pieces missing or in the wrong spot! Proper parts books, and shop service manual, put all jig saw pi...
- Tue Apr 21, 2020 10:51 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 28802
Re: 450c 6-way fittings?
Ok. Good luck