Search found 5 matches
- Wed Jun 08, 2022 7:34 pm
- Forum: Early model JD crawler technical support
- Topic: valve timing on my 1010
- Replies: 3
- Views: 1831
Re: valve timing on my 1010
I do have a service manual and I am timing with the marks on the cam gear and the crank gear. The cam shaft and gear are original with this engine The crank is a replacement. When I time it using the marks on the two gears I get popping out the exhaust and the exhaust valve is opening too soon in my...
- Tue Jun 07, 2022 8:16 pm
- Forum: Early model JD crawler technical support
- Topic: valve timing on my 1010
- Replies: 3
- Views: 1831
valve timing on my 1010
I picked up a 1010 with a broken crank Purchased a used crank that was turned down 10 rebuilt the engine but I cannot time the engine with the existing marks. When I use the existing marks my exhaust valve opens on the compression stroke. When I use the marks I'm not at top dead center on the flywhe...
- Thu May 07, 2020 3:45 pm
- Forum: Early model JD crawler technical support
- Topic: 440 track questions
- Replies: 5
- Views: 4107
Re: 440 track questions
Thanks for your help greatly appreciated
- Thu May 07, 2020 2:30 pm
- Forum: Early model JD crawler technical support
- Topic: 440 track questions
- Replies: 5
- Views: 4107
Re: 440 track questions
How do I rerim? can I use the sprockets off the 350 or are there rims made to weld on?
- Thu May 07, 2020 7:40 am
- Forum: Early model JD crawler technical support
- Topic: 440 track questions
- Replies: 5
- Views: 4107
440 track questions
I am a newbie at this but I have a 440 with well worn tracks. I have access to a set of 350 tracks that are in good shape. Can I use the 350 tracks? what will it require to make the switch? my 440 tracks are 4 bolt.