It currently will move the drive train in reverse and drive train stops when in neutral. The clutch will also stop it when in reverse. But when shifted into forward position the drive train will not move in the forward direction. Hope this clarifies this issue.
Thanks Chester
Search found 6 matches
- Mon May 18, 2020 8:57 am
- Forum: Late model JD crawler technical support
- Topic: 350B Reverser will not go in forward
- Replies: 6
- Views: 5894
- Sun May 17, 2020 3:18 pm
- Forum: Late model JD crawler technical support
- Topic: 350B Reverser will not go in forward
- Replies: 6
- Views: 5894
350B Reverser will not go in forward
Does anyone have some experience with 350B reversers. I'm in the process of rebuilding a 1973 350B.I had to tare down the reverser to replace the reverser clutches. In the process I thought I had to tare down the piston to get clutches installed. I tore down the forward reverser piston and re-assemb...
- Sun May 17, 2020 2:51 pm
- Forum: Late model JD crawler technical support
- Topic: Need Transmission part for 350B JD PN T20880
- Replies: 2
- Views: 2731
Re: Need Transmission part for 350B JD PN T20880
Thank You for the info. I did find the part I needed from local junk yard.
Thanks Again
Chester
Thanks Again
Chester
- Tue Apr 14, 2020 11:12 am
- Forum: Late model JD crawler technical support
- Topic: Need Transmission part for 350B JD PN T20880
- Replies: 2
- Views: 2731
Need Transmission part for 350B JD PN T20880
Does any one have a source for 350B transmission parts? Need shaft for 1ST AND 4TH SHIFT John Deere PN T20880.
Thanks in advance.
Chester
Thanks in advance.
Chester
- Mon Mar 16, 2020 4:16 pm
- Forum: Late model JD crawler technical support
- Topic: 350B Reverser rebuild
- Replies: 2
- Views: 2222
Re: 350B Reverser rebuild
Thanks for the quick reply. I have all the manuals for this machine, service, operators, and parts. Just wanted some idea of what I was getting into. I have rebuilt the engine have most of the parts in to rebuild final drives and clutches. Tracks were in 80% condition but sprockets were worn and low...
- Mon Mar 16, 2020 1:17 pm
- Forum: Late model JD crawler technical support
- Topic: 350B Reverser rebuild
- Replies: 2
- Views: 2222
350B Reverser rebuild
Can someone give me advice on what I would be getting into rebuilding my reverser on a 350B. I pulled the drain plug on reverser and it was so full of slug that I had to break it loose with screw driver to drain it. I have rebuilt the engine and tracks and don't think I want to put it back together ...