JDcrawlers Messageboard

So finally had some time off from work and finally got after this project. Found that the threads were bad in the clutch manifold that the pipe plug screwed into. First few threads grabbed and that was it. Tapped it and threw a new plug in. Also found that the set screw was missing on the other clut...

Bump

https://ibb.co/PYrxNwS
https://ibb.co/B228ZtB
https://ibb.co/PrJYvDJ

Hey guys. My right hand steering clutch went out on my a while ago. Finally got around to tearing it all apart. To my surprised the clutches appear fine. However two funny things are going on. On the clutch pressure manifold ring, pic 1, it looks like there should be an Allen head plug in it. If I a...

Doing light work with the machine the other track kept up just fine

Hey guys, there seemed to be 15 posts with a similar problem to mine, that were left open ended. So just to help the next guy along: Symptoms: no movement in one track, and while doing hlr adjustment, the pressure on the gauge would increase substantially when the lever to cut power to that track wa...

I had a good look at it yesterday. Looks like I’ll be removing the fuel tank for sure, and more then likely the hydraulic fluid reservoir. Thanks for guiding me in the right direction.

Thanks for the response. I actually just changed oil and checked the screen on this machine. The screen was plugged! I’ve also recently done the hlr adjustment procedure. Something interesting happened while I was doing this procedure. With the pressure gauge installed, whenever I pulled the lever a...

Serial number of the machine is 302884t. And yes I have the proper manual.

Hey guys, I’m having some issues with my machine. When the machine is cold it’s running great. About an hour into pushing dirt, and I’m loosing power on my right hand track. I’m going to assume the clutch isn’t fully engaging and causing slippage. What is the procedure for adjusting this. I’ve read ...

Hey guys, what were you able to figure out with your problems? Just got a 450c and am having the exact same problem