JDcrawlers Messageboard

thanks don. one side panel under the dash is missing, but they usually are. planning on putting it in the shop this week to fix the finals and wiring. planning on taking it to 3 plow days this april, just got a top link for it and i have a 3 bottom plow that it should pull easily.

andrew

thanks bill. my 1010 brochure lists the inside manual angle blade as a 610. only difference between mine and yours is mine has the optional 7ft blade. i might try to find a 612 for it, as my 350 had a 6way and i like them a lot more than the manual angle blades .


andrew

hello guys, heres a few pics of the 1010 i bought from diggerlarry. i need to fix the clutches, wiring, and i am thinking of installing a reverser in it. going to take it to the local plow days this spring if i can get it fixed in time. andrew http://i12.photobucket.com/albums/a247/jd430c/1010-1.jpg...

bill, do u plan on using this dozer at all? if u are u might find it hard to use the blade with the control on the dash. i had a 2010 tractor with a dash mounted 3pt control and hated it. i will call a friend today and pm u if he has the parts.

andrew

i have a JD 3315 winch for sale. will fit all 350s and 1010s. it is complete. believe it works, but havent seen it work and PO didnt know if it worked either. $1500. johndeere430c@yahoo.com or 802-485-6258.

andrew

need to sell my 450c. has wet steering clutches, turbo, 6way blade, rebuilt injector pump, new rolls and front idlers. needs pins and bushings and sprockets. has drawbar and sprockets weights. nice running crawler. asking 11,500. 802-485-6258 or johndeere430c@yahoo.com


andrew

i looked at the 450c friday, turns out i fogot to hook up the return spring. hooked it up and now it works correctly.

andrew

just got my second 450c going today, the right track doesnt have any power going to it. i believe it was working correctly when the engine clutch blew. feels like the steering clutches are slipping. any ideas on what it is or how to fix it. i just got it back together and dont want to tear it apart ...

JR, give me a call when u get a chance, i will go look at it with u if u want and tell u what it is.

andrew

bill, i think i have a set, but finding them will be hard, we have just enough snow on the ground and i cant remember where i put them. if u cant find any closer to u let me know.

andrew

Don, yes u could get 1010s and even early 350s with 4 roll undercarriages. i have seen several up this way. if u look in the photo section and the home page of this site u will see a 1010 4 roller. IMO they look kinda dorky

andrew

hi, the book lists the 3310 as having 10,600lb bare drum line pull, full at 6,650lb. it will hold 195ft of 1/2 cable and 125ft of 5/8 cable. the 10 series winch and the 3310 are pretty much the same. came control, same case, and i think most of the inside stuff is the same. we had a jd 10 on a 1010 ...

hi cuzz, jd model 3310 and 3315 winches were offered for the 350s, but a jd 10 series winch will fit. i dont think a gearmatic 8a will fit. i do know where there is a jd 10 winch if interested.

andrew

i have a set of 1010 4 roll tracks for sale. will fit the 420-440, but wont be original. pads are worn pretty good, but rails and pins and bushings looked good. i will check tomorrow to make sure they are. local pickup only, but i can help trucking. asking 500 for both. johndeere430c@yahoo.com andrew

hi all, been busy working on my 450C's. pulled the motor out of the good running one and found that the clutch disc blew, not the tranny so i took the loader off yesterday. found a 6way blade for it, so i am going to install that and try to sell it. heres a few pics of my progress so far. andrew htt...