JDcrawlers Messageboard

It very well could of been steam. I have adjusted them again just waiting to actually work it hard again and see if it’s any better. The term snug on the break band bolt might be miss leading. I can try backing off that a full turn and see if it makes any difference. If you google John Deere 350 clu...

Yes I have dry clutches. The compartments seam clean to me. Couple spots of rust but nothing terrible. I will try working it hard again once I use the machine again. I was driving if after I adjusted everything with the covers off and was checking the compartments and did notice a little smoke comin...

The reservoir under the hood is full

I can’t understand why it started out good but as I worked the machine the steering got less and I had just
Adjusted it a week prior. I’m not sure how often you have to adjust but that was the first time I used it since adjusting it

Forgive my lack of knowledge on this subject but I can’t seem to get the steering clutches adjusted properly. I’ve fallowed the steps in the manual And watched a good YouTube video. They were adjustEd before I bought it due to the left side clutches being replaced. When I got it home and started usi...

The wiring for my hour meter on my 350b dozer is missing. Does anyone how to wire this up or where the wiring came from? All it has is a ground.

Thank you

Sorry I guess where should it be in the site glass?

Anyone know what the proper full line in the site glass for the hydraulic oil is on a John Deere 350b dozer?

Thanks. I completely agree with you. I’ll find one that meets those specs. I have tractor supply near so that’s most likely where I’ll go. I just didn’t want to put something in it that would cause harm

I want to replace all the hydraulic/transmission oil in my 350B that I just picked up. I don’t have a John Deere dealer super close to me. It’s there a tractor supply or Walmart brand that will work?

Yes the manuals I have are all just for the 350B, but what you sent me makes sense and helps. Thank you very much. Hopefully parts are still available for it.

Thanks. I have all the manuals but can’t find anything on the parts for the valve.

My hydraulic control valve for the 6 way blade is leaking out of the top. Anyone know where to find parts to rebuild these. I see a 2753 number on the side of it