Search found 5 matches
- Sun Apr 26, 2020 8:48 pm
- Forum: Late model JD crawler technical support
- Topic: 450 c 3325 winch
- Replies: 5
- Views: 5757
Re: 450 c 3325 winch
The valve is the same as the one in the picture, a rotary valve. I guess I should do a pressure test, that might tell me if it is the rotary valve. Also I need to get a manual from Lavoy. I will check the serial number the next time I go to the farm. Thanks
- Sun Apr 26, 2020 2:38 pm
- Forum: Late model JD crawler technical support
- Topic: 450 c 3325 winch
- Replies: 5
- Views: 5757
450 c 3325 winch
I think I posted this on early model instead of late model support. I have a 3325 winch that won’t stop turning the drum. I’m not sure if it has a rotary or spool control. It’s a small box up by the oil filter. The control lever is by my thigh when in drivers seat. I believe all the way forward was ...
- Sun Apr 26, 2020 1:47 pm
- Forum: Late model JD crawler technical support
- Topic: 450C near death accident
- Replies: 32
- Views: 86825
Re: 450C near death accident
Thanks for sharing your story, I have a 450 c with a flip lock, I’ll make sure it’s always engaged when I get off the dozer. Hope you get back to normal and back on the 450. We must think of safety on any machine.
- Sun Apr 26, 2020 1:25 pm
- Forum: Late model JD crawler technical support
- Topic: 3325 winch
- Replies: 3
- Views: 2943
Re: 3325 winch
The winch drum turns as long as the dozer engine is on , Constantly winding the cable in. As far as control valve, it’s a small box on right side by the oil filter. I took it off and just some o rings and it looked fine. The control handle is by my right thigh while sitting in the drivers seat. I be...
- Sat Apr 25, 2020 8:29 pm
- Forum: Late model JD crawler technical support
- Topic: 3325 winch
- Replies: 3
- Views: 2943
3325 winch
My 450 c has a winch that constantly runs, it won’t turn off. I changed the oil and cleaned the screen.
It always run great but sits a lot. Any ideas ?
It always run great but sits a lot. Any ideas ?