Search found 6 matches
- Sat Apr 11, 2020 3:19 pm
- Forum: Late model JD crawler technical support
- Topic: 350b starter
- Replies: 14
- Views: 7256
Re: 350b starter
Well of I can come across parts with out a lot of effort or a ton of money I would do it, but if I don’t I won’t loose any sleep over it either. Just would be nice to have and I gues now would be the time to do it.
- Fri Apr 10, 2020 7:06 pm
- Forum: Late model JD crawler technical support
- Topic: 350b starter
- Replies: 14
- Views: 7256
Re: 350b starter
I was already plan on going through the transmission, if I have the machine tore down that far I’m gonna go through everything .
- Thu Apr 09, 2020 6:56 pm
- Forum: Late model JD crawler technical support
- Topic: 350b starter
- Replies: 14
- Views: 7256
Re: 350b starter
Sounds good I will be getting a hold of you when I get things torn down and ready to order parts
- Thu Apr 09, 2020 5:41 pm
- Forum: Late model JD crawler technical support
- Topic: 350b starter
- Replies: 14
- Views: 7256
Re: 350b starter
So I can use the winch while using reverse, now winch only works with reverser in forward And the transmission in a gear or neutral
- Thu Apr 09, 2020 3:17 pm
- Forum: Late model JD crawler technical support
- Topic: 350b starter
- Replies: 14
- Views: 7256
Re: 350b starter
Thanks for the reply, when I turned the drums , and relined the bands I am pretty sure they are for factory spec and not for undersized drums. Is it possible that i just have no adjustment left and could be fixed with the right bands
- Thu Apr 09, 2020 10:11 am
- Forum: Late model JD crawler technical support
- Topic: 350b starter
- Replies: 14
- Views: 7256
350b starter
hello everyone , this is my first post here , i have a 1973 350b diesel , i have a few questions about , i had the nose of the starter break off and fall into the flywheel / reverser housing . this is the second time i have had this happen in the last 15 years, is this a known issue? i plan to pull ...