Search found 5 matches
- Wed Jul 29, 2020 6:01 pm
- Forum: Early model JD crawler technical support
- Topic: 420 carburator pre-settings
- Replies: 3
- Views: 3226
Re: 420 carburator pre-settings
Thank you so much. I a[ppreciate your quick response. pastordon
- Wed Jul 29, 2020 1:56 pm
- Forum: Early model JD crawler technical support
- Topic: 420 carburator pre-settings
- Replies: 3
- Views: 3226
420 carburator pre-settings
I have rebuilt the carburetor on a 420 crawler, serial # 87987. What would be the rough adjustment (if any) before trying to start the engine? I understand how to adjust it after you get it cranked. I hve the 420 series service manual and the 2013 model 40 series tractor manual and neither one give ...
- Thu Jul 02, 2020 6:17 am
- Forum: Early model JD crawler technical support
- Topic: clutch plate thickness
- Replies: 6
- Views: 5283
Re: clutch plate thickness
Thanks again for the reply. Pastordon
- Wed Jul 01, 2020 6:09 am
- Forum: Early model JD crawler technical support
- Topic: clutch plate thickness
- Replies: 6
- Views: 5283
Re: clutch plate thickness
Thanks for the reply. Pastordon
- Mon Jun 29, 2020 7:12 pm
- Forum: Early model JD crawler technical support
- Topic: clutch plate thickness
- Replies: 6
- Views: 5283
clutch plate thickness
I have a 420c with serial # 87937. I have rebuilt the motor and about ready to set it back in the dozer. How thick should the clutch plate be ? IT looks like the clutch plate is new but I do not have any measurement to go by. Any help would be appreciated. Thanks