JDcrawlers Messageboard

I'll get in touch. Thanks

My 1010 pushes great for about a half hour, then it starts slowing down to the point where it can only move it's self forward slowly. Reverse is not effected and works as normal. I'm thinking the front clutch piston seals are bypassing fluid after it warms up and it's not putting pressure on the dis...

Check the fuel line to the tank and filters. Pump may be starving for fuel.

broncO419 do you own a Bronco?

Does anybody know why the 1010 steering clutch plate counts differ? Early 1010 (ser 0-31000) uses 8 friction plates and 8 steels, while the newer 1010 (ser 31000-up) use 8 friction plates and only 7 steels. Do they use the same pressure plate?
What's the reasoning behind this?

Hi guys, I'm new here and have an early 1010c crawler and a 500A backhoe. The crawler wouldn't turn left so I tore down that side to work on the steering clutches. They were rusted together and the shaft that the throwout bearing is attached to wouldn't turn. That's when I noticed that the housing w...