Search found 3 matches
- Tue May 17, 2022 9:14 am
- Forum: Late model JD crawler technical support
- Topic: 450E reverse HLR pressure seems low
- Replies: 4
- Views: 3632
Re: 450E reverse HLR pressure seems low
Weather is getting good and I need to use the dozer. Reverse quits pulling or barely works when the trans starts to get warm H and L work great and push loads no problem even when the trans warms up Everything seems to be adjusted properly I changed the filter and cleaned the screen in the trans. Ha...
- Fri Dec 17, 2021 10:01 pm
- Forum: Late model JD crawler technical support
- Topic: 450E reverse HLR pressure seems low
- Replies: 4
- Views: 3632
Re: 450E reverse HLR pressure seems low
Ah, yes. That is the same manual I have.
I missed the part "slow idle"
I'll have to readjust it tomorrow and see how the pressures behave.
I missed the part "slow idle"
I'll have to readjust it tomorrow and see how the pressures behave.
- Fri Dec 17, 2021 12:57 pm
- Forum: Late model JD crawler technical support
- Topic: 450E reverse HLR pressure seems low
- Replies: 4
- Views: 3632
450E reverse HLR pressure seems low
I was having issues with the dozer not pushing when the oil got hot Found out the adjuster nut in the bellhousing had vibrated loose and almost ready to fall off. I adjusted the HLR pressure and the dozer seems to move good now. 1.) Shifting into reverse the pressure gauge reads a lot lower than the...