Thanks,
As soon as the weather clears up I will pull it apart, hope it is just a loose fitting.
Don
Search found 15 matches
- Sun Feb 19, 2023 11:48 am
- Forum: Late model JD crawler technical support
- Topic: 3325 winch leaking from weep hole
- Replies: 4
- Views: 1733
- Sat Feb 18, 2023 6:57 pm
- Forum: Late model JD crawler technical support
- Topic: 3325 winch leaking from weep hole
- Replies: 4
- Views: 1733
3325 winch leaking from weep hole
Evening all, My 3325 winch squirts hydraulic oil about 30 feet out a small weep hole located below the center of the left quill when I engage the retrieve function. It winds in slowly without power but leaks like a sieve. It spools fine I have looked in my books and can't determine which seals and O...
- Mon Mar 21, 2022 11:56 am
- Forum: John Deere crawler FAQ's
- Topic: JD450 thru JD450G Serial Numbers
- Replies: 28
- Views: 172268
Re: JD450 thru JD450G Serial Numbers
Hello Jim,
Sorry about posting in the wrong place, but thank you for the information. I will go ahead and order those parts you listed.
Seems there is always something to do when you own a dozer.
Take Care,
Puzlrock
Sorry about posting in the wrong place, but thank you for the information. I will go ahead and order those parts you listed.
Seems there is always something to do when you own a dozer.
Take Care,
Puzlrock
- Thu Mar 10, 2022 12:59 pm
- Forum: John Deere crawler FAQ's
- Topic: JD450 thru JD450G Serial Numbers
- Replies: 28
- Views: 172268
Re: JD450 thru JD450G Serial Numbers
I guess I might be a little dense. :?: I own a 450C with a six way dozer that the over pressure filter button on the hydralic tank started popping up on. I found the Serial Number plate on the front of the battery box. 4500C 264170T Looking at the chart the number doesn't show me much about my dozer...
- Sun Oct 03, 2021 4:59 pm
- Forum: Late model JD crawler technical support
- Topic: BAD Diesel HELP
- Replies: 12
- Views: 7368
Re: BAD Diesel HELP
I use a product called PRI-D. https://theepicenter.com/pri-d-diesel-fuel-treatment-pint.html If you take the time to read the article and the attached information you might want to use it. It really works. I use it in all my diesels and my tanks and barrels, keeps the fuel fresh for a long time, lub...
- Thu Aug 05, 2021 10:45 am
- Forum: John Deere crawler FAQ's
- Topic: Snowplowing
- Replies: 8
- Views: 20513
Re: Snowplowing
I have ice bars welded on my grousers to stop the sleigh rides, love plowing snow. Did it for years with a wheel tractor, be hard to go back.
- Wed Aug 04, 2021 9:52 pm
- Forum: Early model JD crawler technical support
- Topic: Location information
- Replies: 17
- Views: 67697
Re: Location information
puzlrock Trout Creek Montana NW Corner
- Wed Jul 21, 2021 1:06 pm
- Forum: Off-topic discussions
- Topic: BF McDonald Tin Hat Suspensions
- Replies: 0
- Views: 16781
BF McDonald Tin Hat Suspensions
I wore one of these tin hats for about 40 years before my last suspension wore out and I couldn't find a replacement. Last fall I went looking and found a source for them. I ordered one and it works great and I am glad to have my old tin hat back, I am not a fan of the plastic. Anyway, if you are in...
- Wed Apr 14, 2021 10:57 am
- Forum: Late model JD crawler technical support
- Topic: Question about 450C rollers
- Replies: 2
- Views: 2593
Re: Question about 450C rollers
Thanks Leonard,
I wondered if that was the case with the rollers.
I am currently trying to remove the rock guards and replace the left rear roller.
Had to order some special tools that will be here Friday, I hope.
Thank You
puzlrock
(Don Nance)
I wondered if that was the case with the rollers.
I am currently trying to remove the rock guards and replace the left rear roller.
Had to order some special tools that will be here Friday, I hope.
Thank You
puzlrock
(Don Nance)
- Sun Apr 11, 2021 1:10 pm
- Forum: Late model JD crawler technical support
- Topic: Question about 450C rollers
- Replies: 2
- Views: 2593
Question about 450C rollers
Hello, Well, as I work through this 1977 450C dozer I am finding new problems, one roller bad and needs to be replaced, the rest I wonder if they need lubing. All of them have a 5/16 square plug in them that is very tight. Do I need to get the plug out to service them? They don't look like the pictu...
- Sun Mar 21, 2021 3:24 pm
- Forum: Late model JD crawler technical support
- Topic: After market engine numbers location
- Replies: 10
- Views: 5600
Re: After market engine numbers location
Hello, I have discovered a lot since my last post. The engine SeriaI Number is: 4219DF-01-275484, the casting numbers on the block are R55011-R55034. It is 80 hp engine off a Sullair 185cfm air compressor. John Deere told me that the engines were sold to Sullair without serial numbers and the number...
- Wed Mar 10, 2021 3:18 pm
- Forum: Late model JD crawler technical support
- Topic: After market engine numbers location
- Replies: 10
- Views: 5600
Re: After market engine numbers location
Hello, I have the serial number for the dozer: 264170T. After cleaning up the tag on the engine I found it is a John Deere engine. Trying to find a match to the numbers I found has me baffled. The guy I bought it from said it had a aftermarket engine in it is about all I know. The first characters I...
- Sat Mar 06, 2021 5:10 pm
- Forum: Late model JD crawler technical support
- Topic: After market engine numbers location
- Replies: 10
- Views: 5600
Re: After market engine numbers location
Hello, I found the little plate on the engine right where you said it would be. Someone had painted over it pretty heavy so I will get some paint remover and clean it off so I can read the numbers. I will be back when I get that.
Thanks for the help!
Thanks for the help!
- Sat Mar 06, 2021 11:22 am
- Forum: Late model JD crawler technical support
- Topic: After market engine numbers location
- Replies: 10
- Views: 5600
Re: After market engine numbers location
Hello, The dozer is a 450c according to the serial number. I was told it was a aftermarket engine. It is turbo charged and runs strong. The tach doesn't work. The previous owner told me there wasn't a place to hook the tach to the engine. he didn't know where the engine came from. I heard that some ...
- Fri Mar 05, 2021 4:26 pm
- Forum: Late model JD crawler technical support
- Topic: After market engine numbers location
- Replies: 10
- Views: 5600
After market engine numbers location
I purchased a 450C that has an after market engine in it. I can find casting numbers on it but they seem to lead no where. Is there some place on the engine I should be looking?
Really enjoy this site, you have helped me with several issues and repairs. Thank Yoou
Really enjoy this site, you have helped me with several issues and repairs. Thank Yoou