Search found 17 matches
- Tue Apr 27, 2010 4:15 pm
- Forum: Show & Tell
- Topic: 420C is sold
- Replies: 0
- Views: 2734
420C is sold
Sold
- Sat Apr 25, 2009 9:48 pm
- Forum: Early model JD crawler technical support
- Topic: 420C overheating problem!!!!
- Replies: 3
- Views: 3614
Thanks I did some checking and it looks like the water pump belt was turning, but it was slipping. I could turn it with my hand. The radiator also had alot of dirt in it. I have washed ot out. The problem I am having is that the set screw on the pulley is broken off flush. I have not found a drill t...
- Fri Apr 24, 2009 9:16 am
- Forum: Early model JD crawler technical support
- Topic: 420C overheating problem!!!!
- Replies: 3
- Views: 3614
420C overheating problem!!!!
I have a 1956 420C 5 roller which might be overheating, but I would like some advice. I have put a new temp guage on it last year. The machine is running at 210 F when I work it over an hour. i have noticed that the oil pressure drops from 22psi to 10 or less when it is running that temp. I usually ...
- Sun Nov 09, 2008 7:07 pm
- Forum: Early model JD crawler technical support
- Topic: Clutch linkage problems
- Replies: 2
- Views: 3080
- Sat Nov 08, 2008 10:13 pm
- Forum: Early model JD crawler technical support
- Topic: Clutch linkage problems
- Replies: 2
- Views: 3080
Clutch linkage problems
I was wondering if anyone has had any problems with the snap ring that holds the linkage that pushes the throwout bearing. It is a very small snap ring and I don't think it will stay on the shaft groove. has anyone tried any other methods to keep the ring from snapping off and having to break the do...
- Sat Dec 29, 2007 10:00 pm
- Forum: Early model JD crawler technical support
- Topic: My 420C is seeping oil around head
- Replies: 3
- Views: 4780
- Sat Dec 29, 2007 10:58 am
- Forum: Early model JD crawler technical support
- Topic: My 420C is seeping oil around head
- Replies: 3
- Views: 4780
My 420C is seeping oil around head
I was wondering if anyone out their has had their crawler do this. I rencently put a new head on my 420C about 4 hours ago and I ran it over the holidays pushing brush pretty hard and I noticed that the temp was 175 and the oil pressure was 25PSI but their was some oil seeping around the head. I cut...
- Sun Mar 18, 2007 7:22 pm
- Forum: Early model JD crawler technical support
- Topic: 420C oil Pressure Low HELP!!!!!!
- Replies: 1
- Views: 2876
420C oil Pressure Low HELP!!!!!!
I was running my 420c the other day for about one hour when I noticed that the oil pressure guage had dropped from 21psi to about 15psi. I slowed the engine down and the guage red about 5 psi at idle. This dozer was not used much from the previous owner so I first changed the oil and filter and foun...
- Sat Jan 27, 2007 12:57 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 198844
- Wed Jan 03, 2007 9:23 pm
- Forum: Early model JD crawler technical support
- Topic: 420C wont idle
- Replies: 6
- Views: 5932
- Sun Dec 31, 2006 8:26 am
- Forum: Early model JD crawler technical support
- Topic: 420C wont idle
- Replies: 6
- Views: 5932
- Fri Dec 29, 2006 8:07 am
- Forum: Early model JD crawler technical support
- Topic: 420C wont idle
- Replies: 6
- Views: 5932
420c will not idle
It was soaked in a gallon bucket of gunk carb cleaner. I wonder if the nozzle is where it is stopped up. I have not been able to get it out, but I am going to try again. I have ran a wire down the hole on the bowl and it stops and will not go any further. Could the nozzle be turned in a way that the...
- Thu Dec 28, 2006 6:47 pm
- Forum: Early model JD crawler technical support
- Topic: 420C wont idle
- Replies: 6
- Views: 5932
420C wont idle
I am having problems with my TSX 641 carb on my 420c crawler. I took it off because it would not idle at all. I would adjust the air bleed screw and nothing would change. So I took it apart and soaked it for 2 days in parts cleaner. I ran a wire through all the ports in the top of the carb and blew ...
- Thu Dec 14, 2006 7:42 pm
- Forum: Early model JD crawler technical support
- Topic: cutting out problem fixed
- Replies: 7
- Views: 6665
420 Cutting out
Gary, I think it could possibly be something totally different. If it runs great without a load, then chokes completely down it could be your condensor in the distributor. Yes, I said condensor. That $3.00 part had me all confused two different machines a 430T and my other 430W. They ran fine the da...
- Sun Dec 10, 2006 11:21 am
- Forum: Early model JD crawler technical support
- Topic: 420C Track adjustment
- Replies: 2
- Views: 3581
420C Track adjustment
I was wondering how much trouble it is to adjust my tracks up on my 420c 5 roller. From the looks of it I don't think it has been moved in a long time. I noticed that someone had a track adjuster on e-bay for a 430c or 420c and the decription said that it was a hydraulic track adjuster. I did not th...