Search found 149 matches
- Fri Jul 29, 2022 10:07 am
- Forum: Early model JD crawler technical support
- Topic: John deere #90 loader Quick attach or oem forks...
- Replies: 0
- Views: 3530
John deere #90 loader Quick attach or oem forks...
Has anybody found a good way to convert a #90 loader to quick attach? Or does any one have a set of forks that would pin right on? Thanks In advance!
- Tue Jun 07, 2022 11:08 am
- Forum: Early model JD crawler technical support
- Topic: Adding pto to 420c
- Replies: 3
- Views: 3406
Re: Adding pto to 420c
I sent you an e-mail Lavoy. We dont have any old boneyards very close to pick up parts from
- Tue Jun 07, 2022 5:48 am
- Forum: Early model JD crawler technical support
- Topic: Adding pto to 420c
- Replies: 3
- Views: 3406
Adding pto to 420c
Hi yall I did see a post on this a while back but never really could find what parts I really need to add pto to my crawler. Does somebody know what parts/ part numbers I need? Thanks!
- Sat Apr 09, 2022 10:26 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 440 sold at auction
- Replies: 6
- Views: 14832
Re: 440 sold at auction
Can I get half that outta my 420c???
- Wed Mar 23, 2022 3:27 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Loader forks
- Replies: 8
- Views: 7925
Re: ISO Loader forks
Ok I will try to! I hope to do it this year..
- Wed Mar 02, 2022 3:23 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Wanted john deere #90 loader tilt cylinder
- Replies: 0
- Views: 3441
Wanted john deere #90 loader tilt cylinder
Hi yall i am looking for a bucket tilt cylinder for my #90 loader Pm me if you have one! Thanks!
- Tue Feb 22, 2022 7:34 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Loader forks
- Replies: 8
- Views: 7925
Re: ISO Loader forks
That would work if I could find em
- Mon Feb 14, 2022 8:13 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Loader forks
- Replies: 8
- Views: 7925
Re: ISO Loader forks
I will be taking the bucket off I am planning to haul up to 3000 pounds with it. Bucket clamp on forks wont hold up to the rough use compared to a set of forks with a frame
- Sat Feb 12, 2022 10:38 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Loader forks
- Replies: 8
- Views: 7925
ISO Loader forks
I am looking for loader forks for a john deere #90 loader or quiktach and maybe even a set I could modify to fit. it does need to have a backplate.
- Thu Jan 27, 2022 10:32 am
- Forum: Early model JD crawler technical support
- Topic: john deere 420c steering clutch linkage adjustment...
- Replies: 14
- Views: 14351
Re: john deere 420c steering clutch linkage adjustment...
Yes it ended up being the brake adjustment.. I feel so dummm...... It was too loose and man it steers nice!!!!
- Tue Jan 25, 2022 11:28 am
- Forum: Early model JD crawler technical support
- Topic: john deere 420c steering clutch linkage adjustment...
- Replies: 14
- Views: 14351
Re: john deere 420c steering clutch linkage adjustment...
So no I did not readjust every thing... there is no play in the linkage and it feels correct. The other side that works wonderful has plenty (almost too much) free travel and has play in the linkage and I can feel distinctly when the clutch engauges and it steers beautiful.
- Tue Jan 25, 2022 7:17 am
- Forum: Early model JD crawler technical support
- Topic: john deere 420c steering clutch linkage adjustment...
- Replies: 14
- Views: 14351
Re: john deere 420c steering clutch linkage adjustment...
The balls and inserts seemed good, the pressure
Plate on this side is a little older than the other side. Being a year or 2 old
Plate on this side is a little older than the other side. Being a year or 2 old
- Mon Jan 24, 2022 6:11 pm
- Forum: Early model JD crawler technical support
- Topic: john deere 420c steering clutch linkage adjustment...
- Replies: 14
- Views: 14351
Re: john deere 420c steering clutch linkage adjustment...
So I shortened that linkage to where there is no play and handle feels super good. but alas still wont hardly respond until pulled all the way back... Is the pressure plate a potential problem? I dont know how they act when they go out....
- Sat Jan 22, 2022 8:20 pm
- Forum: Early model JD crawler technical support
- Topic: john deere 420c steering clutch linkage adjustment...
- Replies: 14
- Views: 14351
Re: john deere 420c steering clutch linkage adjustment...
Yes mine is right at the edge as well Both clutches are rebuilt one works beautiful the other does not... What is the chances of have a weak pressure plate?
- Sat Jan 22, 2022 6:41 pm
- Forum: Early model JD crawler technical support
- Topic: john deere 420c steering clutch linkage adjustment...
- Replies: 14
- Views: 14351
Re: john deere 420c steering clutch linkage adjustment...
Yes I have been going through correct procedures in the book. when I pull the lever back the throwout does not move untill the handle is halfway pulled back....