Pulling both steering clutches did not change pressure at all.
I am going to pull transmission cover off. Maybe I will get lucky and find something obvious.
Search found 4 matches
- Sun Jan 24, 2021 12:56 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Transmission Pump pressure
- Replies: 7
- Views: 5298
- Sat Jan 23, 2021 7:18 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Transmission Pump pressure
- Replies: 7
- Views: 5298
Re: JD 450C Transmission Pump pressure
Finally replaced filters & fluid.
No surprise that pressure did not increase at all.
Starting to remove engine to check pump, unless someone has a better idea.
No surprise that pressure did not increase at all.
Starting to remove engine to check pump, unless someone has a better idea.
- Sat Dec 05, 2020 4:09 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Transmission Pump pressure
- Replies: 7
- Views: 5298
Re: JD 450C Transmission Pump pressure
SN# on tag is 450CA 312228T. Pretty sure 1978. It is a crawler loader. My manual is a technical manual for JD 450c crawler. Manual says there should be 180 psi at port on transmission. I am only getting 40 - 60 psi at any rpm. Tried adding multiple shims with no change in pressure at all. Hoping a b...
- Sat Dec 05, 2020 12:38 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Transmission Pump pressure
- Replies: 7
- Views: 5298
JD 450C Transmission Pump pressure
Transmission pump pressure is only 40 psi. Could anything but a faulty pump be the cause?
Machine runs and works fine except for low power when moving.
Machine runs and works fine except for low power when moving.