Search found 13 matches
- Sat Feb 27, 2021 7:05 am
- Forum: Late model JD crawler technical support
- Topic: 1973 450B pto
- Replies: 10
- Views: 5189
Re: 1973 450B pto
Thanks guys.
- Fri Feb 26, 2021 11:18 am
- Forum: Late model JD crawler technical support
- Topic: 1973 450B pto
- Replies: 10
- Views: 5189
Re: 1973 450B pto
Would the part, T122779 be the correct cover?
- Fri Feb 26, 2021 10:17 am
- Forum: Late model JD crawler technical support
- Topic: 1973 450B pto
- Replies: 10
- Views: 5189
Re: 1973 450B pto
Perfect, thats the ticket.thanks
- Fri Feb 26, 2021 10:02 am
- Forum: Late model JD crawler technical support
- Topic: 1973 450B pto
- Replies: 10
- Views: 5189
Re: 1973 450B pto
Can i change that rear bearing from the rear of the machine? Ill take a look at it this evening.
Can i pull the shaft out and leave it out. Maybe weld up the housing?
Can i pull the shaft out and leave it out. Maybe weld up the housing?
- Thu Feb 25, 2021 6:27 pm
- Forum: Late model JD crawler technical support
- Topic: 1973 450B pto
- Replies: 10
- Views: 5189
Re: 1973 450B pto
Thats what i was thinking, problem is, i cant turn it off.
If i can figure out how to disengage it, i will. Hopefully i dont have to pull the front cover off.
If i can figure out how to disengage it, i will. Hopefully i dont have to pull the front cover off.
- Thu Feb 25, 2021 5:06 pm
- Forum: Late model JD crawler technical support
- Topic: 1973 450B pto
- Replies: 10
- Views: 5189
1973 450B pto
Hey guys, i was running my 450b today for about 3 hours. After i finished, i went and checked the pto shaft because i put a new seal in it. And boy it was hot. I mean hot hot, couldn't touch it hot. This cant be normal can it?
- Fri Jan 29, 2021 2:36 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Transmission Pump pressure
- Replies: 7
- Views: 5301
Re: JD 450C Transmission Pump pressure
I had the same issue yesterday, i would suggest doin both clutch adjustments, then recheck the pressures.i ended up not needing shims.
- Fri Jan 29, 2021 2:36 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Transmission Pump pressure
- Replies: 7
- Views: 5301
Re: JD 450C Transmission Pump pressure
I had the same issue yesterday, i would suggest doin both clutch adjustments, the recheck the pressures.i ended up not needing shims.
- Thu Jan 21, 2021 7:04 am
- Forum: Late model JD crawler technical support
- Topic: 1973 450B
- Replies: 3
- Views: 3008
Re: 1973 450B
Thanks, this is really helpful.
- Wed Jan 20, 2021 2:38 pm
- Forum: Late model JD crawler technical support
- Topic: 1973 450B
- Replies: 3
- Views: 3008
1973 450B
Hey guys, im a new owner of a 1973 450b dozer with a bull blade. When i bought it, the transmission was out of fluid. I added fluid and after running it for a few minutes, checked the fluid and its milky. This machine has never been under cover. Is it common to get water in the transmission?? I real...
- Wed Jan 13, 2021 11:49 am
- Forum: Late model JD crawler technical support
- Topic: 1972 450B
- Replies: 6
- Views: 4356
Re: 1972 450B
Im going to verify the serial number today, i have operated dozers for years but im no expert, but to me the undercarriage has normal wear. I have not measured the undercarriage.the blade is a outside hydraulic.i would be ok putting in 3k or so in it. The blade is a little sluggish to lift.
- Wed Jan 13, 2021 10:12 am
- Forum: Late model JD crawler technical support
- Topic: 1972 450B
- Replies: 6
- Views: 4356
Re: 1972 450B
Do you think 2k is a good price? I dont mind the work.
- Wed Jan 13, 2021 9:05 am
- Forum: Late model JD crawler technical support
- Topic: 1972 450B
- Replies: 6
- Views: 4356
1972 450B
Hey guys, im looking at a 450b dozer to buy. Guy that owns in said it moves and turns fine but wont load on his trailer. undercarriage is fine. What could be the cause of in not wanting to load up?
Thanks in advance.
Thanks in advance.