I am assuming initial settings would be different given the different manufacturer. Are the jets the same?
Unfortunately, there was no manual with the new carb so I have to question whether the Zenith works the same re screw in for lean or out for lean?
Search found 8 matches
- Tue Oct 05, 2021 10:36 am
- Forum: Early model JD crawler technical support
- Topic: zenith 14997 carb
- Replies: 3
- Views: 2896
- Sun Oct 03, 2021 12:34 pm
- Forum: Early model JD crawler technical support
- Topic: zenith 14997 carb
- Replies: 3
- Views: 2896
zenith 14997 carb
I had to replace the TSX777 on my 440IC with a new Zenith 14997.
Has anyone else done this? If so, what did you use for initial carb settings?
Peter Kuzyk
Thunder Bay, ON
Has anyone else done this? If so, what did you use for initial carb settings?
Peter Kuzyk
Thunder Bay, ON
- Tue Jun 01, 2021 3:10 pm
- Forum: Early model JD crawler technical support
- Topic: 440ic carb options
- Replies: 3
- Views: 2823
440ic carb options
I have a TSX777 on my loader that I need to replace. This seems to be impossible.
I had heard that these machines came with a number of different carbs.
Can anyone tell me what my options are? Some TSX models seem to be easily replaced....
Peter
Thunder Bay, ON
I had heard that these machines came with a number of different carbs.
Can anyone tell me what my options are? Some TSX models seem to be easily replaced....
Peter
Thunder Bay, ON
- Thu Mar 18, 2021 5:29 pm
- Forum: Early model JD crawler technical support
- Topic: 440 rod bearings
- Replies: 4
- Views: 3456
Re: 440 rod bearings
My local shop gave me the numbers but couldn't get through their supplier.
- Thu Mar 18, 2021 3:15 pm
- Forum: Early model JD crawler technical support
- Topic: 440 rod bearings
- Replies: 4
- Views: 3456
440 rod bearings
Does anyone have a source that will ship to Canada?
I need one set of Clevite CB436B or Federal Mogul 2210SB - either one at 20 thou over
Peter
I need one set of Clevite CB436B or Federal Mogul 2210SB - either one at 20 thou over
Peter
- Tue Mar 16, 2021 1:51 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC Oil Pump Install
- Replies: 4
- Views: 3385
Re: 440IC Oil Pump Install
I was afraid someone might suggest that but perhaps that is better news if oil pump parts aren't available.
Just in the middle of rebuilding the carb and then I think I will move it to a good spot for dropping the oil pan and having a look at the bottom end.
sigh
Just in the middle of rebuilding the carb and then I think I will move it to a good spot for dropping the oil pan and having a look at the bottom end.
sigh
- Tue Mar 16, 2021 7:43 am
- Forum: Early model JD crawler technical support
- Topic: 440IC Oil Pump Install
- Replies: 4
- Views: 3385
Re: 440IC Oil Pump Install
Thanks for the link. I had found it in my search but was not clear on whether or on the tool was still required.
Will give this process a shot!
Will give this process a shot!
- Mon Mar 15, 2021 2:53 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC Oil Pump Install
- Replies: 4
- Views: 3385
440IC Oil Pump Install
I have recently acquired a 59 440IC. It has dealt me a few blows, but so far, no Knock Out punches. My latest problem, under load, I hear bottom end noise and "bouncing" of my oil pressure. I am considering dropping the pan and have a go at an oil pump rebuild.....but.... I see in the service manual...