Search found 2 matches
- Sun Mar 21, 2021 9:10 am
- Forum: Early model JD crawler technical support
- Topic: JD1010 Clutch setup
- Replies: 3
- Views: 3096
Re: JD1010 Clutch setup
Thanks Jim, I have the original service manual. Its pretty dated, but all intact for the most part. I think what I meant to say was axle bearing retainer. On mine the bearings aren't opposing. They are both facing the same direction, the tapered end is toward the left on both.So what looks to have h...
- Sat Mar 20, 2021 9:57 am
- Forum: Early model JD crawler technical support
- Topic: JD1010 Clutch setup
- Replies: 3
- Views: 3096
JD1010 Clutch setup
I have an old 1010 and the previous owner replaced the clutches in both sides. I have two issues 1. The right side clutch worked perfect, but the axle walked out and ruined the quill, axle and seal. I dont see what holds it in aside from the quill. When I tighten the retainer down it doesn't push on...