Search found 6 matches
- Tue May 04, 2021 5:40 am
- Forum: Late model JD crawler technical support
- Topic: 350 pressure plate retaining clips
- Replies: 2
- Views: 2476
Re: 350 pressure plate retaining clips
Thanks for the help, those clips are a beast.
- Mon May 03, 2021 6:55 pm
- Forum: Late model JD crawler technical support
- Topic: 350 pressure plate retaining clips
- Replies: 2
- Views: 2476
350 pressure plate retaining clips
What is the best way to remove and install retaining clips on fingers on jd 350 pressure plate?
- Mon May 03, 2021 6:43 pm
- Forum: Late model JD crawler technical support
- Topic: straight 350 P/M?
- Replies: 6
- Views: 3856
Re: straight 350 P/M?
In the process of doing finals , steering clutches, etc. My advice is change out seals, bearings, tube for throw out bearing. do it now, dont worry about it later.
- Mon Apr 26, 2021 6:47 pm
- Forum: Late model JD crawler technical support
- Topic: J.D.350 steering clutch replacement
- Replies: 4
- Views: 3224
Re: J.D.350 steering clutch replacement
Bad move my part, replaced bi metallic discs, thrust bearing, pressure plate, seals and bearings. did not replace steel discs, looked good to me, but never miked them. Looked down the hole seems like the spring for the shaft the thrust bearing rides on has come loose. Parts came from authorized JD d...
- Sun Apr 25, 2021 5:04 pm
- Forum: Late model JD crawler technical support
- Topic: J.D.350 steering clutch replacement
- Replies: 4
- Views: 3224
J.D.350 steering clutch replacement
Just finished rebuilding both final drives on my 350, left side perfect, right side no control. New pressure plate and bi metallic discs. Any ideas? Thanks
- Sat Apr 03, 2021 6:57 am
- Forum: Late model JD crawler technical support
- Topic: 350 final drive oil
- Replies: 1
- Views: 2062
350 final drive oil
Can the JD hy gard be used in the final drives doing steering clutches and can't find oil specs. Thanks