Search found 6 matches
- Mon Oct 04, 2021 11:17 pm
- Forum: Late model JD crawler technical support
- Topic: Starter upgrade
- Replies: 2
- Views: 2324
Re: Starter upgrade
I found one and installed it today
- Sun Oct 03, 2021 10:32 pm
- Forum: Late model JD crawler technical support
- Topic: Starter upgrade
- Replies: 2
- Views: 2324
Starter upgrade
My starter went out today on my 1981 JD450C Dozer. After lots of frustration I was able to get the old starter out. My question is, What are people using as replacements to upgrade these old starters? My hope is it’s something I can pick up at an auto parts store tomorrow. Part numbers would be appr...
- Mon Jul 19, 2021 11:07 pm
- Forum: Late model JD crawler technical support
- Topic: 450C only goes Forward
- Replies: 5
- Views: 4797
Re: 450C only goes Forward
Jim B, Yes it is a Dozer. Sorry about that. I have the TM-1102 manual. I can’t seem to find the blow up diagram that shows what the linkage does once it enters the transmission. It’s hard not having the Dozer here at home to look at. I’m just trying to get a game plan for next time I’m out at the ca...
- Mon Jul 19, 2021 4:16 pm
- Forum: Late model JD crawler technical support
- Topic: 450C only goes Forward
- Replies: 5
- Views: 4797
Re: 450C only goes Forward
Question about the range linkage on my machine. I plan on pulling the top off my transmission next time I’m out at the cabin. I’ve followed the linkage to where it goes into the transmission and everything seems to be moving correctly. Question is, Is there a roll pin or some other mechanism just in...
- Mon Jul 12, 2021 7:23 pm
- Forum: Late model JD crawler technical support
- Topic: 450C only goes Forward
- Replies: 5
- Views: 4797
Re: 450C only goes Forward
Thanks Bruce. The free play in the clutch pedal was at least 4.5”. Now it’s at 3.75”
This machine ran great, right up until it didn’t. Haha. It gave very few clues, if any, before it broke.
This machine ran great, right up until it didn’t. Haha. It gave very few clues, if any, before it broke.
- Mon Jul 12, 2021 6:28 pm
- Forum: Late model JD crawler technical support
- Topic: 450C only goes Forward
- Replies: 5
- Views: 4797
450C only goes Forward
When I mean it only goes forward, I mean there’s no Neutral or Reverse at all. Fire it up and it just starts going forward. I can stop it with the clutch. It’s a late 70’s 450C. I thought there was a neutral safety on these machines? Anyways, I’ve checked the obvious, linkage, clutch adjustment (fre...