JDcrawlers Messageboard

Bill;

Is that Lavoy's Christmas present that you bought?

Dean

Scot; I'll give it a shot, the diff lock shouldn't have any effect on the engine starting. Possibility the starter is engaged to the flywheel. Locked up as you said. Try taking the starter off an see if it will engage outside the bell housing. If it won't have it checked out. Check batteries, cable ...

Trucker1450:

You should post some pictures. Then someone would give you an honest answer.
Just a guess not seeing it.

Mailtrain

dlplost:

I would take it to a Alternator,starter repair shop before I would buy new.

If you can't find one there is one up here that would do it. Just my opinion.

mailtrain

Nice pic's Brian. Isn't it fun to play a little. Nice timber, trade you some hardwood for some Fir.
You should have an arch make skidding a lot easier. Looks like a family event, that's good.

Mailtrain

You could have shut the door,and not shared the cold with us.

To late now-10 below tomorrow night and -20 after that.

Lavoy do you know where a rear wheel for a JD m can be found I think

it is a 47 not sure. Thanks

Mailtrain

Merry Christmas to you also Dan, and all the forum members.

Mailtrain

Thanks Shinnery I thought a little humor wouldn't hurt this time of year.

That was the first pic that I tried.

That was a christmas card from my truck dealer couldn't resist. Thanks again.

Mailtrain Merry Christmas to all on jdcrawlers.com

Did something wrong pis didn't make it.

mailtrain

Some place up north this Deere Dealer was confused.


[img]http://www.jdcrawlers.com/uploads/picture_111.jpg[img]

Timberqtrs

The year is 1968 three cyl diesel.As the value pic's would be nice and others on here would tell you that part.

Mailtrain

Hi 420cbrett ;

There are many post about this.Rule of thumb and many will tell you the
same,never use both reverses at the same time. Most have the transmission blocked so as not to use it . Take a bolt and nut put it in the slot for rev and tighten it up and forget about it.

mailtrain

Hi Steveo; Most of the guy's on here would die for one. If the price is right take it in a heart beat . I'm sure that you can find parts for it. I would look around the island, the blade could be there. Post some pic's if possible, Lavoy will tell you all you need to know about it mailtrain

jdemaris;

This info was from a farm equipment guide. Unknown if maybe this was just a quick reference for the salesman to the buyer.

mailtrain

jdemaris :

I just bought a 10kw generator set with a White diesel with a stanadyne

pump. Would this be the same application as Deere? Unavailable parts

too?

mailtrain