JDcrawlers Messageboard

Thanks for everyone's comments. Especially LeonardL. We found out that I have the original wear straps that were thick and recessed for both bolts, JD soon changed after much negative comments from JD service tech's. They just weren't well thought out. dtoots was on the right track suggesting cuttin...

Thanks for reply. I hadn't but I did try a few now. The wrenches I tried are too thick to fit into the recess as well as not deep enough offset. I have Craftsman, Husky and some others but no major mechanic brand names but mine all have similar thickness to the wrench. I'm looking for a thinner deep...

First I do not claim to be a mechanic but become one to support my other interests of working in the woods. So I'm usually working out in the woods with basic tools far from a shop or concrete floor. I have a radiator issue on my JD350C and found the information on this site as to the removal proced...

What models used the 90 loader ?

Hi, I don't claim to be a stellar mechanic or even a mechanic but certainly a good parts replacer. It sounds like the bendix is out, you can get starters rebuilt relatively fast. It seems most decent size cities have several shops that specialize in rebuilding alternators and starters. I can't remem...

I just bought a 1978 350C with a 6-way blade. I bought it with the understanding that it needed a lift pump. I replaced the lift pump as well as the fuel filter. The engine would only run a few seconds and die off. I decided to change the solenoid in the injection pump. I did this today, at first th...